c0d3 :: j0rg3

A collection of tips, tricks and snips. A proud Blosxom weblog. All code. No cruft.

Thu, 13 Jul 2017

Improved Anonymity on Kali Linux

I’m not entirely certain when BackTrack/Kali began behaving more like a regular desktop distro but I seem to recall that originally, networking subsystems were down when you booted up into Run Level 3. It was up to you to turn on the interfaces and fire up a GUI if such was desired. IMO, that’s precisely how it should be. I get it. Most of us aren’t ever won’t ever find ourselves in a clandestine lot, inside of a snack and caffeine filled, non-descript, conversion van with a Yagi pointed at the bubble-window, ready to pilfer innocent datums just trying to get by in this lossy-protocoled, collision-rife, world.

Rather, very many of us just want the stinking box online so we can run through our tutorials and hack our own intentionally vulnerable VMs. A thorough taste of hacking’s un-glamorous underbelly is quite enough for many.

I’m confident that the BT fora were inundated with fledgling hackers complaining that their fresh install couldn’t find WiFi or didn’t load the desktop. However, I feel that distros dedicated to the Red Team should try to instill good habits. Having your machine boot and activate an interface announcing your presence and spewing out MAC and hostname is bad for business. Booting into a (comparatively) heavy GUI is also not where I want to begin.

Let’s imagine that we’re trying to crack into a thing. Don’t we want to apply maximal CPU resources, rather than having GUI elements bringing little beyond cost? If you notice, very many of the related tools still live on the CLI. The typical course of development (e.g.: Nmap, Metasploit) is that the CLI version is thoroughly developed before someone drops a GUI atop (respectively: Zenmap, Armitage).


So let’s take our Kali and make a few quick changes. We want to boot up in text/CLI mode and we want networking left off until we choose to make noise. Further, we want to randomize our MAC address and hostname at every boot.

We’ll use iwconfig to enumerate our wireless interfaces.
lo        no wireless extensions.

wlan1     IEEE 802.11 ESSID:"ESSID"
          Mode:Managed Frequency:2.412 GHz Access Point: 17:23:53:96:BE:67
          Bit Rate=72.2 Mb/s Tx-Power=20 dBm
          Retry short limit:7 RTS thr:off Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=70/70 Signal level=-21 dBm
          Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
          Tx excessive retries:253 Invalid misc:400 Missed beacon:0

eth0      no wireless extensions.

wlan0     IEEE 802.11 ESSID:off/any
          Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
          Retry short limit:7 RTS thr:off Fragment thr:off
          Encryption key:off
          Power Management:on

We have two wireless interfaces: wlan0, wlan1

Okay, first let’s configure to start up in text mode:
> systemctl set-default multi-user.target
Created symlink /etc/systemd/system/default.target → /lib/systemd/system/multi-user.target.

Traditionally from text mode, we bring up the GUI desktop with the command startx. Since we don’t yet have that command, let’s create it:
> echo "systemctl start gdm3.service" > /usr/sbin/startx && chmod +x /usr/sbin/startx

Disable network-manager autostart:
> systemctl disable network-manager.service
> sed -i 's/5min/30sec/' /etc/systemd/system/network-online.target.wants/networking.service

Now, let’s randomize our hostname and MAC addresses at every boot by adding some cronjobs:
> crontab -e

We’ll add two jobs to randomize MAC address and one for our host name:
@reboot macchanger -r wlan0
@reboot macchanger -r wlan1
@reboot hostname `strings /dev/urandom | grep -o '[[:alnum:]]' | head -n 30 | tr -d '\n'`

We ‘re good! We’ve improved efficiency by staving off the GUI for when we genuinely want it and improved anonymity by randomizing some common ways of identifying the rig.


Tags: , , , , , , , ,
Permalink: 2017-07-10.improved.anonymity.on.kali.linux

Thu, 13 Jun 2013

Blogitechture continued… Simplify with Vim

Last we were discussing the structure and design of your own CLI-centric blog platform, we had some crude methods of starting and resuming posts before publishing.

Today, let’s explore a little more into setting up a bloging-friendly environment because we need to either make the experience of blogging easy or we’ll grow tired of the hassle and lose interest.

We can reasonably anticipate that we won’t want to beleaguered with repetitious typing of HTML bits. If we’re going to apply paragraph tags, hyperlinks, codeblocks, etc. with any frequency, that task is best to be simplified. Using Vim as our preferred editor, we will use Tim Pope’s brilliant plug-ins ‘surround’ and ‘repeat’, combined with abbreviations to take away the tedium.

The plug-ins just need dropped into your Vim plugin directory (~/.vim/plugin/). The directory may not exist if you don’t have any plug-ins yet. That’s no problem, though. Let’s grab the plugins:

cd ~/.vim/
wget "http://www.vim.org/scripts/download_script.php?src_id=19287" -O surround.zip
wget "http://www.vim.org/scripts/download_script.php?src_id=19285" -O repeat.zip

Expand the archives into the appropriate directories:

unzip surround.zip
unzip repeat.zip

Ta-da! Your Vim is now configured to quickly wrap (surround) in any variety of markup. When working on a blog, you might use <p> tags a lot by putting your cursor amid the paragraph and typing yss<p>. The plug-in will wrap it with opening and closing paragraph tags. Move to your next paragraph and then press . to repeat.

That out of the way, let’s take advantage of Vim’s abbreviations for some customization. In our .vimrc file, we can define a few characters that Vim will expand according to their definition. For example, you might use:
ab <gclb> <code class="prettyprint lang-bsh linenums:1">
Then, any time you type <gclb> and bress <enter>, you’ll get:
<code class="prettyprint lang-bsh linenums:1">

The next time that we take a look at blogitecture, we will focus on making the posts convenient to manage from our CLI.


Tags: , , , ,
Permalink: 20130613.blogitechture.continued

Sun, 09 Jun 2013

ixquick link maker

In an effort to promote practical privacy measures, when I send people links to search engines, I choose ixquick. However, my personal settings submit my search terms via POST data rather than GET, meaning that the search terms aren’t in the URL.

Recently, I’ve found myself hand-crafting links for people and then I paste the link into a new tab, to make sure I didn’t fat-finger anything. Not a problem per se, but the technique leaves room for a bit more efficiency. So I’ve taken the ‘A Search Box on Your Website’ tool offered by ixquick and slightly modified the code it offers, to use GET variables, in a new tab where I can then copy the URL and provide the link to others.

You can test, or use, it here — I may add it (or a variant that just provides you the link) to the navigation bar above. First, though, I’m going to mention the need to the outstanding minds at ixquick because it would make a LOT more sense on their page than on mine.


Tags: ,
Permalink: 20130609.ixquick.search

Thu, 30 May 2013

Making ixquick your default search engine

In this writer’s opinion, it is vitally important that we take reasonable measures now to help insure anonymity, lest we create a situation where privacy no longer exists, and the simple want of, becomes suspicious.

Here’s how to configure your browser to automatically use a search engine that respects your privacy.

Chrome:

  1. Click Settings.
  2. Click “Set pages” in the “On startup” section.
  3. Enter https://ixquick.com/eng/ in the “Add a new page” text field.
  4. Click OK.
  5. Click “Manage search engines…”
  6. At the bottom of the “Search Engines” dialog, click in the “Add a new search engine” field.
  7. Enter
    ixquick
    ixquick.com
    https://ixquick.com/do/search?lui=english&language=english&cat=web&query=%s
  8. Click “Make Default”.
  9. Click “Done”.

Firefox:

  1. Click the Tools Menu.
  2. Click Options.
  3. Click the General tab.
  4. In “When Firefox Starts” dropdown, select “Show my home page”.
  5. Enter https://ixquick.com/eng/ in the “Home Page” text field.
  6. Click one of the English options here.
  7. Check box for “Start using it right away.”
  8. Click “Add”.

Opera:

  1. Click “Manage Search Engines
  2. Click “Add”
  3. Enter
    Name: ixquick
    Keyword: x
    Address: https://ixquick.com/do/search?lui=english&language=english&cat=web&query=%s
  4. Check “Use as default search engine”
  5. Click “OK”

Internet Explorer:

      _     ___  _ __        ___   _ _____ ___ 
     | |   / _ \| |\ \      / / | | |_   _|__ \
     | |  | | | | | \ \ /\ / /| | | | | |   / /
     | |__| |_| | |__\ V  V / | |_| | | |  |_| 
     |_____\___/|_____\_/\_/   \___/  |_|  (_) 
    
    
    (This is not a good strategy for privacy.)

Congratulations!

\o/

You are now one step closer to not having every motion on the Internet recorded.

This is a relatively small measure, though. You can improve your resistance to prying eyes (e.g., browser fingerprinting) by using the Torbrowser Bundle, or even better, Tails, and routing your web usage through Tor, i2p, or FreeNet.

If you would like more on subjects like anonymyzing, privacy and security then drop me a line via email or Bitmessage me: BM-2D9tDkYEJSTnEkGDKf7xYA5rUj2ihETxVR


Tags: , , , , , , , , , , , , , ,
Permalink: 20130530.hey.you.get.offa.my.data