c0d3 :: j0rg3

A collection of tips, tricks and snips. A proud Blosxom weblog. All code. No cruft.

Sat, 25 Jan 2014

Network-aware Synergy client

My primary machines are *nix or BSD variants, though I certainly have some Windows-based rigs also. Today we’re going to share some love with Windows 7 and PowerShell.

One of my favorite utilities is Synergy. If you’re not already familiar it allows to you seamlessly move from the desktop of one computer to another with the same keyboard and mouse. It even supports the clipboard so you might copy text from a GNU/Linux box and paste it in a Windows’ window. Possibly, they have finished adding drag and drop to the newer versions. I am not sure because I run a relatively old version that is supported by all of the machines that I use regularly.

What’s the problem, then? The problem was that I was starting my Synergy client by hand. Even more disturbing, I was manually typing the IP address at work and at home, twice or more per weekday. This behavior became automated by my brain and continued for months unnoticed. But this is no kind of life for a geek such as myself, what with all this superfluous clicking and tapping!

Today, we set things right!

In my situation, the networks that I use happen to assign IP addresses from different subnets. If you’ve not the convenience of that situation then you might need to add something to the script. Parsing an ipconfig/ifconfig command, you could possibly use something like the Default Gateway or the Connection-specific DNS Suffix. Alternatively, you could check for the presence of some network share, a file on server or anything that would allow you to uniquely identify the surroundings.

As I imagined it, I wanted the script to accomplish the following things

  • see if Synergy is running (possibly from the last location), if so ask if we need to kill it and restart so we can identify a new server
  • attempt to locate where we are and connect to the correct Synergy server
  • if the location is not identified, ask whether to start the Synergy client

This is how I accomplished that task:

# [void] simply supresses the noise made loading 'System.Reflection.Assembly'
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")

# Define Synergy server IP addresses
$synergyServerWork = ""
$synergyServerHome = ""

# Define partial IP addresses that will indicate which server to use
$synergyWorkSubnets = "192.168.111", "192.168.115"
$synergyHomeSubnets = "192.168.222", "192.168.225"

# Path to Synergy Client (synergyc)
$synergyClientProgram = "C:\Program Files\Synergy\synergyc.exe"

# Path to Syngery launcher, for when we cannot identify the network
$synergyLauncherProgram = "C:\Program Files\Synergy\launcher.exe"

# Remove path and file extension to give us the process name
$processName = $synergyClientProgram.Substring( ($synergyClientProgram.lastindexof("\") + 1), ($synergyClientProgram.length - ($synergyClientProgram.lastindexof("\") + 5) ))

# Grab current IP address
$currentIPaddress = ((ipconfig | findstr [0-9].\.)[0]).Split()[-1]

# Find the subnet of current IP address
$location = $currentIPaddress.Substring(0,$currentIPaddress.lastindexof("."))

function BalloonTip ($message)
# Pop-up message from System Tray
$objNotifyIcon = New-Object System.Windows.Forms.NotifyIcon
$objNotifyIcon.Icon = [System.Drawing.Icon]::ExtractAssociatedIcon($synergyClientProgram)
$objNotifyIcon.BalloonTipText = $message
$objNotifyIcon.Visible = $True


# If Synergy client is already running, do we need to restart it?
$running = Get-Process $processName -ErrorAction SilentlyContinue
if ($running) {
$answer = [System.Windows.Forms.MessageBox]::Show("Synergy is running.`nClose and start again?", "OHNOES", 4)
if ($answer -eq "YES") {
Stop-Process -name $processName
Else {

# Do we recognize the current network?
if ($synergyWorkSubnets -contains $location) {
BalloonTip "IP: $($currentIPaddress)`nServer: $($synergyServerWork)`nConnecting to Synergy server at work."
& $synergyClientProgram $synergyServerWork
ElseIf ($synergyHomeSubnets -contains $location) {
BalloonTip "IP: $($currentIPaddress)`nServer: $($synergyServerHome)`nConnecting to Synergy server at home."
& $synergyClientProgram $synergyServerHome
Else {
$answer = [System.Windows.Forms.MessageBox]::Show("Network not recognized by IP address: {0}`n`nLaunch Synergy?" -f $unrecognized, "OHNOES", 4)
if ($answer -eq "YES") {
& $synergyLauncherProgram

Then I saved the script in "C:\Program Files\SynergyStart\", created a shortcut and used the Change Icon button to make the same as Synergy’s and made the Target:
C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -WindowStyle Hidden & 'C:\Program Files\SynergyStart\synergy.ps1'

Lastly, I copied the shortcut into the directory of things that run when the system starts up:
%APPDATA%\Microsoft\Windows\Start Menu\Programs\Startup

Now, Synergy connects to the needed server at home and work. If it can’t figure out where it is, it asks if it should run it at all.

As they say, a millisecond saved is a millisecond earned.

This post was very nearly published without a Linux equivalent. Nearly.

Same trick for bash/zsh: #!/bin/zsh

# Define Synergy server IP addresses

# Define partial IP addresses that will indicate which server to use
synergyWorkSubnets=("192.168.111" "192.168.115")
synergyHomeSubnets=("192.168.222" "192.168.225")

# Path to Synergy Client (synergyc)

# Path to QuickSyngery, for when we cannot identify the network

# Remove path and file extension to give us the process name
processName=`basename $synergyClientProgram`

# Grab current IP address, assumes '192' is in use. (e.g.,
currentIPaddress=`ip addr show | grep 192 | awk "{print $2}" | sed 's/inet //;s/\/.*//;s/ //g'`

# Find the subnet of current IP address
location=`echo $currentIPaddress | cut -d '.' -f 1,2,3`

for i in "${synergyWorkSubnets[@]}"
if [ "${i}" = "${location}" ]


# If Synergy client is already running, do we need to restart it?
running=`ps ax | grep -v grep | grep $processName`
if [ $running ]
if `zenity --question --ok-label="Yes" --cancel-label="No" --text="Synergy is running.\nClose and start again?"`
pkill $processName

# Do we recognize the current network?
for i in "${synergyWorkSubnets[@]}"
if [ "${i}" = "${location}" ]
notify-send "IP:$currentIPaddress Server:$synergyServerWork [WORK]"
$synergyClientProgram $synergyServerWork

for i in "${synergyHomeSubnets[@]}"
if [ "${i}" = "${location}" ]
notify-send "IP:$currentIPaddress Server:$synergyServerWork [HOME]"
$synergyClientProgram $synergyServerHome

if `zenity --question --ok-label="Yes" --cancel-label="No" --text="Network not recognized by IP address: $currentIPaddress\nLaunch Synergy?"`

To get it to run automatically, you might choose to call the script from /etc/init.d/rc.local.

Download here:

Tags: , ,
Permalink: 20140125.network_aware_synergy_client

Sun, 09 Jun 2013

ixquick link maker

In an effort to promote practical privacy measures, when I send people links to search engines, I choose ixquick. However, my personal settings submit my search terms via POST data rather than GET, meaning that the search terms aren’t in the URL.

Recently, I’ve found myself hand-crafting links for people and then I paste the link into a new tab, to make sure I didn’t fat-finger anything. Not a problem per se, but the technique leaves room for a bit more efficiency. So I’ve taken the ‘A Search Box on Your Website’ tool offered by ixquick and slightly modified the code it offers, to use GET variables, in a new tab where I can then copy the URL and provide the link to others.

You can test, or use, it here — I may add it (or a variant that just provides you the link) to the navigation bar above. First, though, I’m going to mention the need to the outstanding minds at ixquick because it would make a LOT more sense on their page than on mine.

Tags: ,
Permalink: 20130609.ixquick.search

Thu, 30 May 2013

Making ixquick your default search engine

In this writer’s opinion, it is vitally important that we take reasonable measures now to help insure anonymity, lest we create a situation where privacy no longer exists, and the simple want of, becomes suspicious.

Here’s how to configure your browser to automatically use a search engine that respects your privacy.


  1. Click Settings.
  2. Click “Set pages” in the “On startup” section.
  3. Enter https://ixquick.com/eng/ in the “Add a new page” text field.
  4. Click OK.
  5. Click “Manage search engines…”
  6. At the bottom of the “Search Engines” dialog, click in the “Add a new search engine” field.
  7. Enter
  8. Click “Make Default”.
  9. Click “Done”.


  1. Click the Tools Menu.
  2. Click Options.
  3. Click the General tab.
  4. In “When Firefox Starts” dropdown, select “Show my home page”.
  5. Enter https://ixquick.com/eng/ in the “Home Page” text field.
  6. Click one of the English options here.
  7. Check box for “Start using it right away.”
  8. Click “Add”.


  1. Click “Manage Search Engines
  2. Click “Add”
  3. Enter
    Name: ixquick
    Keyword: x
    Address: https://ixquick.com/do/search?lui=english&language=english&cat=web&query=%s
  4. Check “Use as default search engine”
  5. Click “OK”

Internet Explorer:

      _     ___  _ __        ___   _ _____ ___ 
     | |   / _ \| |\ \      / / | | |_   _|__ \
     | |  | | | | | \ \ /\ / /| | | | | |   / /
     | |__| |_| | |__\ V  V / | |_| | | |  |_| 
     |_____\___/|_____\_/\_/   \___/  |_|  (_) 
    (This is not a good strategy for privacy.)



You are now one step closer to not having every motion on the Internet recorded.

This is a relatively small measure, though. You can improve your resistance to prying eyes (e.g., browser fingerprinting) by using the Torbrowser Bundle, or even better, Tails, and routing your web usage through Tor, i2p, or FreeNet.

If you would like more on subjects like anonymyzing, privacy and security then drop me a line via email or Bitmessage me: BM-2D9tDkYEJSTnEkGDKf7xYA5rUj2ihETxVR

Tags: , , , , , , , , , , , , , ,
Permalink: 20130530.hey.you.get.offa.my.data