c0d3 :: j0rg3

A collection of tips, tricks and snips. A proud Blosxom weblog. All code. No cruft.

Thu, 13 Jul 2017

Improved Anonymity on Kali Linux

I’m not entirely certain when BackTrack/Kali began behaving more like a regular desktop distro but I seem to recall that originally, networking subsystems were down when you booted up into Run Level 3. It was up to you to turn on the interfaces and fire up a GUI if such was desired. IMO, that’s precisely how it should be. I get it. Most of us aren’t ever won’t ever find ourselves in a clandestine lot, inside of a snack and caffeine filled, non-descript, conversion van with a Yagi pointed at the bubble-window, ready to pilfer innocent datums just trying to get by in this lossy-protocoled, collision-rife, world.

Rather, very many of us just want the stinking box online so we can run through our tutorials and hack our own intentionally vulnerable VMs. A thorough taste of hacking’s un-glamorous underbelly is quite enough for many.

I’m confident that the BT fora were inundated with fledgling hackers complaining that their fresh install couldn’t find WiFi or didn’t load the desktop. However, I feel that distros dedicated to the Red Team should try to instill good habits. Having your machine boot and activate an interface announcing your presence and spewing out MAC and hostname is bad for business. Booting into a (comparatively) heavy GUI is also not where I want to begin.

Let’s imagine that we’re trying to crack into a thing. Don’t we want to apply maximal CPU resources, rather than having GUI elements bringing little beyond cost? If you notice, very many of the related tools still live on the CLI. The typical course of development (e.g.: Nmap, Metasploit) is that the CLI version is thoroughly developed before someone drops a GUI atop (respectively: Zenmap, Armitage).

So let’s take our Kali and make a few quick changes. We want to boot up in text/CLI mode and we want networking left off until we choose to make noise. Further, we want to randomize our MAC address and hostname at every boot.

We’ll use iwconfig to enumerate our wireless interfaces.
lo        no wireless extensions.

wlan1     IEEE 802.11 ESSID:"ESSID"
          Mode:Managed Frequency:2.412 GHz Access Point: 17:23:53:96:BE:67
          Bit Rate=72.2 Mb/s Tx-Power=20 dBm
          Retry short limit:7 RTS thr:off Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=70/70 Signal level=-21 dBm
          Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
          Tx excessive retries:253 Invalid misc:400 Missed beacon:0

eth0      no wireless extensions.

wlan0     IEEE 802.11 ESSID:off/any
          Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
          Retry short limit:7 RTS thr:off Fragment thr:off
          Encryption key:off
          Power Management:on

We have two wireless interfaces: wlan0, wlan1

Okay, first let’s configure to start up in text mode:
> systemctl set-default multi-user.target
Created symlink /etc/systemd/system/default.target → /lib/systemd/system/multi-user.target.

Traditionally from text mode, we bring up the GUI desktop with the command startx. Since we don’t yet have that command, let’s create it:
> echo "systemctl start gdm3.service" > /usr/sbin/startx && chmod +x /usr/sbin/startx

Disable network-manager autostart:
> systemctl disable network-manager.service
> sed -i 's/5min/30sec/' /etc/systemd/system/network-online.target.wants/networking.service

Now, let’s randomize our hostname and MAC addresses at every boot by adding some cronjobs:
> crontab -e

We’ll add two jobs to randomize MAC address and one for our host name:
@reboot macchanger -r wlan0
@reboot macchanger -r wlan1
@reboot hostname `strings /dev/urandom | grep -o '[[:alnum:]]' | head -n 30 | tr -d '\n'`

We ‘re good! We’ve improved efficiency by staving off the GUI for when we genuinely want it and improved anonymity by randomizing some common ways of identifying the rig.

Tags: , , , , , , , ,
Permalink: 2017-07-10.improved.anonymity.on.kali.linux

Wed, 26 Jun 2013

Terminal suddenly Chinese

The other day, I was updating one of my systems and I noticed that it had decided to communicate with me in Chinese. Since I don’t know a lick of Chinese, it made for a clumsy exchange.

It was Linux Mint (an Ubuntu variant), so a snip of the output from an ‘apt-get upgrade’ looked like this: terminal screen with Chinese characters

I’m pretty sure I caused it — but there’s no telling what I was working on and how it slipped past me. Anyway, it’s not a difficult problem to fix but I imagine it could look like big trouble.

So, here’s what I did:
> locale

The important part of the output was this:

If you want to set your system to use a specific editor, you can set $EDITOR=vi and then you’re going to learn that some programs expect the configuration to be set in $VISUAL and you’ll need to change it there too.

In a similar way, many things were using the en_US.UTF-8 set in LANG, but other things were looking to LANGUAGE and determining that I wanted Chinese.

Having identified the problem, the fix was simple. Firstly, I just changed it in my local environment:

That solved the immediate problem but, sooner or later, I’m going to reboot the machine and the Chinese setting would have come back. I needed to record the change somewhere for the system to know about it in the future.

> vim /etc/default/locale

Therein was the more permanent record, so I changed LANGUAGE there also, giving the result:


And now, the computer is back to using characters that I (more-or-less) understand.

Tags: , , , , ,
Permalink: 20130626.terminal.suddenly.chinese

Sun, 09 Jun 2013

ixquick link maker

In an effort to promote practical privacy measures, when I send people links to search engines, I choose ixquick. However, my personal settings submit my search terms via POST data rather than GET, meaning that the search terms aren’t in the URL.

Recently, I’ve found myself hand-crafting links for people and then I paste the link into a new tab, to make sure I didn’t fat-finger anything. Not a problem per se, but the technique leaves room for a bit more efficiency. So I’ve taken the ‘A Search Box on Your Website’ tool offered by ixquick and slightly modified the code it offers, to use GET variables, in a new tab where I can then copy the URL and provide the link to others.

You can test, or use, it here — I may add it (or a variant that just provides you the link) to the navigation bar above. First, though, I’m going to mention the need to the outstanding minds at ixquick because it would make a LOT more sense on their page than on mine.

Tags: ,
Permalink: 20130609.ixquick.search

Thu, 30 May 2013

Making ixquick your default search engine

In this writer’s opinion, it is vitally important that we take reasonable measures now to help insure anonymity, lest we create a situation where privacy no longer exists, and the simple want of, becomes suspicious.

Here’s how to configure your browser to automatically use a search engine that respects your privacy.


  1. Click Settings.
  2. Click “Set pages” in the “On startup” section.
  3. Enter https://ixquick.com/eng/ in the “Add a new page” text field.
  4. Click OK.
  5. Click “Manage search engines…”
  6. At the bottom of the “Search Engines” dialog, click in the “Add a new search engine” field.
  7. Enter
  8. Click “Make Default”.
  9. Click “Done”.


  1. Click the Tools Menu.
  2. Click Options.
  3. Click the General tab.
  4. In “When Firefox Starts” dropdown, select “Show my home page”.
  5. Enter https://ixquick.com/eng/ in the “Home Page” text field.
  6. Click one of the English options here.
  7. Check box for “Start using it right away.”
  8. Click “Add”.


  1. Click “Manage Search Engines
  2. Click “Add”
  3. Enter
    Name: ixquick
    Keyword: x
    Address: https://ixquick.com/do/search?lui=english&language=english&cat=web&query=%s
  4. Check “Use as default search engine”
  5. Click “OK”

Internet Explorer:

      _     ___  _ __        ___   _ _____ ___ 
     | |   / _ \| |\ \      / / | | |_   _|__ \
     | |  | | | | | \ \ /\ / /| | | | | |   / /
     | |__| |_| | |__\ V  V / | |_| | | |  |_| 
     |_____\___/|_____\_/\_/   \___/  |_|  (_) 
    (This is not a good strategy for privacy.)



You are now one step closer to not having every motion on the Internet recorded.

This is a relatively small measure, though. You can improve your resistance to prying eyes (e.g., browser fingerprinting) by using the Torbrowser Bundle, or even better, Tails, and routing your web usage through Tor, i2p, or FreeNet.

If you would like more on subjects like anonymyzing, privacy and security then drop me a line via email or Bitmessage me: BM-2D9tDkYEJSTnEkGDKf7xYA5rUj2ihETxVR

Tags: , , , , , , , , , , , , , ,
Permalink: 20130530.hey.you.get.offa.my.data

Tue, 07 May 2013

Welcome, traveler.

Thanks for visiting my little spot on the web. This is a Blosxom ‘blog which, for those who don’t know, is a CGI written in Perl using the file-system (rather than a database).

To the CLI-addicted, this is an awesome little product. Accepting, of course, that you’re going to get under the hood if you’re going to make it the product you want. After some modules and hacking, I’m pleased with the result.

My posts are just text files, meaning I start a new one like: vim ~posts/`date +%Y%m%d`.brief.subject.txt

Note: the back-ticks (`) tell the system that you want to execute the command between ticks, and dynamically insert its output into the command. In this case, the command date with these parameters:
  1. (+) we’re going to specify a format
  2. (%Y) four-digit year
  3. (%m) two-digit month
  4. (%d) two-digit day
That means the command above will use Vim to edit a text file named ‘20130507.brief.subject.txt’ in the directory I have assigned to the hash of ‘posts’. (using hash this way is a function of Zsh that I’ll cover in another post)

In my CLI-oriented ‘blog, I can sprinkle in my own HTML or use common notation like wrapping a word in underscores to have it underlined, forward-slashes for italics and asterisks for bold.

Toss in a line that identifies tags and, since Perl is the beast of Regex, we pick up the tags and make them links, meta-tags, etc.

Things here are likely to change a lot at first, while I twiddle with CSS and hack away at making a Blosxom that perfectly fits my tastes — so don’t be too alarmed if you visit and things look a tad wonky. It just means that I’m tinkering.

Once the saw-horses have been tucked away, I’m going to take the various notes I’ve made during my years in IT and write them out, in a very simple breakdown, aimed at sharing these with people who know little about how to negotiate the command line. The assumption here is that you have an interest in *nix/BSD. If you’ve that and the CLI is not a major part of your computing experience, it probably will be at some point. If you’re working on systems remotely, graphical interfaces often just impede you.

Once you’ve started working on remote machines, the rest is inevitable. You can either remember how to do everything two ways, through a graphical interface and CLI — or just start using the CLI for everything.

So let’s take a little journey through the kinds of things that make me love the CLI.

Tags: , , , , , , , , ,
Permalink: 20130507.greetings