c0d3 :: j0rg3

A collection of tips, tricks and snips. A proud Blosxom weblog. All code. No cruft.

Mon, 17 Feb 2014

Installing INN’s Project Largo in a Docker containter

Prereqruisites: Docker, Git, SSHFS.

Today we’re going to look at using Docker to create a WordPress installation with the Project Largo parent theme and a child theme stub for us to play with.

Hart Hoover has established an image for getting a WordPress installation up and running using Docker. For whatever reason, it didn’t work for me out-of-box but we’re going to use his work to get started.

Let’s make a place to work and move into that directory:
cd ~
mkdir project.largo.wordpress.docker
cd project.largo.wordpress.docker

We’ll clone the Docker/Wordpress project. For me, it couldn’t untar the latest WordPress. So we’ll download it outside the container, untar it and modify the Dockerfile to simply pull in a copy:
git clone https://github.com/hhoover/docker-wordpress.git
cd docker-wordpress/
ME=$(whoami)
wget http://wordpress.org/latest.tar.gz
tar xvf latest.tar.gz
sed -i 's/ADD http:\/\/wordpress.org\/latest.tar.gz \/wordpress.tar.gz/ADD \.\/wordpress \/wordpress/' Dockerfile
sed -i '/RUN tar xvzf \/wordpress\.tar\.gz/d' Dockerfile

Then, build the project which may take some time.
sudo docker build -t $ME/wordpress .

If you’ve not the images ready for Docker, the process should begin with something like:
Step 0 : FROM boxcar/raring
Pulling repository boxcar/raring
32737f8072d0: Downloading [> ] 2.228 MB/149.7 MB 12m29s

And end something like:
Step 20 : CMD ["/bin/bash", "/start.sh"]
---> Running in db53e215e2fc
---> 3f3f6489c700
Successfully built 3f3f6489c700

Once the project is built, we will start it and forward ports from the container to the host system, so that the Docker container’s site can be accessed through port 8000 of the host system. So, if you want to see it from the computer that you’ve installed it on, you could go to ‘HTTP://127.0.0.1:8000’. Alternatively, if your host system is already running a webserver, we could use SSHFS to mount the container’s files within the web-space of the host system.

In this example, however, we’ll just forward the ports and mount the project locally (using SSHFS) so we can easily edit the files perhaps using a graphical IDE such as NetBeans or Eclipse.

Okay, time to start our Docker image and find its IP address (so we can mount its files):
DID=$(docker run -p 8000:80 -d $ME/wordpress)
DIP=$(docker inspect $DID | grep IPAddress | cut -d '"' -f 4)
docker logs $DID| grep 'ssh user password:' --color

Copy the SSH password and we will make a local directory to access the WordPress installation of our containter.
cd ~
mkdir largo.mount.from.docker.container
sshfs user@$DIP:/var/www $HOME/largo.mount.from.docker.container
cd largo.mount.from.docker.container
PROJECT=$(pwd -P)

Now, we can visit the WordPress installation and finish setting up. From the host machine, it should be ‘HTTP://127.0.0.1:8000’. There you can configure Title, Username, Password, et cet. and finish installing WordPress.

Now, let’s get us some Largo! Since this is a test project, we’ll sacrifice security to make things easy. Our Docker WordPress site isn’t ready for us to easily install the Largo parent theme, so we’ll make the web directory writable by everybody. Generally, this is not a practice I would condone. It’s okay while we’re experimenting but permissions are very important on live systems!

Lastly, we’ll download and install Largo and the Largo child theme stub.
ssh user@$DIP 'sudo chmod -R 777 /var/www'
wget https://github.com/INN/Largo/archive/master.zip -O $PROJECT/wp-content/themes/largo.zip
unzip $PROJECT/wp-content/themes/largo.zip -d $PROJECT/wp-content/themes/
mv $PROJECT/wp-content/themes/Largo-master $PROJECT/wp-content/themes/largo
wget http://largoproject.wpengine.netdna-cdn.com/wp-content/uploads/2012/08/largo-child.zip -O $PROJECT/wp-content/themes/largo-child.zip
unzip $PROJECT/wp-content/themes/largo-child.zip -d $PROJECT/wp-content/themes
rm -rf $PROJECT/wp-content/themes/__MACOSX/

We are now ready to customize our Project Largo child theme!


Tags: , , , , , ,
Permalink: 20140217.project.largo.docker

Mon, 13 May 2013

Zsh and hash

Documentation for this one seems a bit hard to come by but it is one of the things I love about Zsh.

I’ve seen many .bashrc files that have things like:
alias www='cd /var/www'
alias music='cd /home/j0rg3/music'

And that’s a perfectly sensible way to make life a little easier, especially if the paths are very long.

In Zsh, however, we can use the hash command and the shortcut we get from it works fully as the path. Other words, using the version above, if we want to edit ‘index.html’ in the ‘www’ directory, we would have to issue the shortcut to get there and then edit the file, in two steps:
> www
> vim index.html

The improved version in .zshrc would look like:
hash www=/var/www
hash -d www=/var/www

Then, at any time, you can use tilde (~) and your shortcut in place of path.
> vim ~www/index.html

Even better, it integrates with Zsh’s robust completions so you can, for example, type cd ~www/ and then use the tab key to cycle through subdirectories and files.

On this system, I’m using something like this:
(.zshrc)
hash posts=/home/j0rg3/weblog/posts
hash -d posts=/home/j0rg3/weblog/posts

Then we can make a function to create a new post, to paste into .zshrc. Since we want to be able to edit and save, without partial posts becoming visible, while we are working, we’ll use an extra .tmp extension at the end:
post() { vim ~posts/`date +%Y-%m`/`date +%Y%m%d`.$1.txt.tmp }

[ In-line date command unfamiliar? See earlier explanation ]

But, surely there is going to be a point when we need to save a post and finish it later. For now, let’s assume that only a single post will be in limbo at any time. We definitely don’t want to have to remember the exact name of the post — and we don’t want to have hunt it down every time.

We can make those things easier like this:
alias resume="vim `find ~posts/ -name '*.txt.tmp'`"

Now, we can just enter resume and the system will go find the post we were working on and open it up for us to finish. The file will need the extension renamed from .txt.tmp to only .txt to publish the post but, for the sake of brevity, we’ll think about that (and having multiple posts in editing) on another day.


Tags: , , , ,
Permalink: 20130513.zsh.and.hash

Tue, 07 May 2013

Welcome, traveler.

Thanks for visiting my little spot on the web. This is a Blosxom ‘blog which, for those who don’t know, is a CGI written in Perl using the file-system (rather than a database).

To the CLI-addicted, this is an awesome little product. Accepting, of course, that you’re going to get under the hood if you’re going to make it the product you want. After some modules and hacking, I’m pleased with the result.

My posts are just text files, meaning I start a new one like: vim ~posts/`date +%Y%m%d`.brief.subject.txt

Note: the back-ticks (`) tell the system that you want to execute the command between ticks, and dynamically insert its output into the command. In this case, the command date with these parameters:
  1. (+) we’re going to specify a format
  2. (%Y) four-digit year
  3. (%m) two-digit month
  4. (%d) two-digit day
That means the command above will use Vim to edit a text file named ‘20130507.brief.subject.txt’ in the directory I have assigned to the hash of ‘posts’. (using hash this way is a function of Zsh that I’ll cover in another post)

In my CLI-oriented ‘blog, I can sprinkle in my own HTML or use common notation like wrapping a word in underscores to have it underlined, forward-slashes for italics and asterisks for bold.

Toss in a line that identifies tags and, since Perl is the beast of Regex, we pick up the tags and make them links, meta-tags, etc.

Things here are likely to change a lot at first, while I twiddle with CSS and hack away at making a Blosxom that perfectly fits my tastes — so don’t be too alarmed if you visit and things look a tad wonky. It just means that I’m tinkering.

Once the saw-horses have been tucked away, I’m going to take the various notes I’ve made during my years in IT and write them out, in a very simple breakdown, aimed at sharing these with people who know little about how to negotiate the command line. The assumption here is that you have an interest in *nix/BSD. If you’ve that and the CLI is not a major part of your computing experience, it probably will be at some point. If you’re working on systems remotely, graphical interfaces often just impede you.

Once you’ve started working on remote machines, the rest is inevitable. You can either remember how to do everything two ways, through a graphical interface and CLI — or just start using the CLI for everything.

So let’s take a little journey through the kinds of things that make me love the CLI.


Tags: , , , , , , , , ,
Permalink: 20130507.greetings