c0d3 :: j0rg3

A collection of tips, tricks and snips. A proud Blosxom weblog. All code. No cruft.

Thu, 23 May 2013

GNU Screen: Roll your own system monitor

Working on remote servers, some tools are practically ubiquitous — while others are harder to come by. Even if you’ve the authority to install your preferred tools on every server you visit, it’s not always something you want to do. If you’ve hopped on to a friend’s server just to troubleshoot a problem, there is little reason to install tools that your friend is not in the habit of using. Some servers, for security reasons, are very tightly locked down to include only a core set of tools, to complicate the job of any prying intruders. Or perhaps it is a machine that you normally use through a graphical interface but on this occasion you need to work from the CLI.

These are very compelling reasons to get comfortable, at the very least, with tools like Vim, mail, grep and sed. Eventually, you’re likely to encounter a situation where only the classic tools are available. If you aren’t competent with those tools, you’ll end up facing the obstacle of how to get files from the server to your local environment where you can work and, subsequently, how to get the files back when you’re done. In a secured environment, this may not be possible without violating protocols.

Let’s take a look at how we can build a makeshift system monitor using some common tools. This particular configuration is for a server running PHP, MySQL and has the tools Htop and mytop installed. These can easily be replaced with top and a small script to SHOW FULL PROCESSLIST, if needed. The point here is illustrative, to provide a template to be modified according to each specific environment.

(Note: I generally prefer tmux to Gnu Screen but screen is the tool more likely to be already installed, so we’ll use it for this example.)

We’re going to make a set of windows, by a configuration file, to help us keep tabs on what is happening in this system. In so doing, we’ll be using the well-known tools less and watch. More specifically, less +F which tells less to “scroll forward”. Other words, less will continue to read the file making sure any new lines are added to the display. You can exit this mode with CTRL+c, search the file (/), quit(q) or get back into scroll-forward mode with another uppercase F.

Using watch, we’ll include the “-d” flag which tells watch we want to highlight any changes (differences).

We will create a configuration file for screen by typing:

> vim monitor.screenrc

In the file, paste the following:

# Screen setup for system monitoring
# screen -c monitor.screenrc
hardstatus alwayslastline
hardstatus string '%{= kG}[ %{G}%H %{g}][%= %{=kw}%?%-Lw%?%{r}(%{W}%n*%f%t%?(%u)%?%{r})%{w}%?%+Lw%?%?%= %{g}][%{B}%Y-%m-%d %{W}%c %{g}]'

screen -t htop 0 htop
screen -t mem 1 watch -d "free -t -m"
screen -t mpstat 2 watch -d "mpstat -A"
screen -t iostat 3 watch -d "iostat"
screen -t w 4 watch -d "w"
screen -t messages 5 less +F /var/log/messages
screen -t warn 6 less +F /var/log/warn
screen -t database 7 less +F /srv/www/log/db_error
screen -t mytop 8 mytop
screen -t php 9 less +F /srv/www/log/php_error

(Note: -t sets the title, then the window number, followed by the command running in that window)

Save the file (:wq) or, if you’d prefer, you can grab a copy by right-clicking and saving this file.

Then we will execute screen using this configuration, as noted in the comment:

> screen -c monitor.screenrc

Then you can switch between windows using CTRL+a, n (next) or CTRL+a, p (previous).

I use this technique on my own computers, running in a TTY different from the one used by X. If the graphical interface should get flaky, I can simply switch to that TTY (e.g., CTRL+ALT+F5) to see what things are going on — and take corrective actions, if needed.


Tags: , , , , , , , , , ,
Permalink: 20130523.gnu.screen.system.monitor

Mon, 20 May 2013

Debugging PHP with Xdebug

I have finished (more-or-less) making a demo for the Xdebug togglin’ add-on/extension that I’ve developed.

One hundred percent of the feedback about this project has been from Chrome users. Therefore, the Chrome extension has advanced with the new features (v2.0), allowing selective en/dis-ableing portions of Xdebug’s output. That is you can set Xdebug to firehose mode (spitting out everything) and then squelch anything not immediately needed at the browser layer. The other information remains present, hidden in the background, available if you decide that you need to have a look.

The Firefox version is still at v1.2 but will be brought up to speed as time permits.

If you want that firehose mode for Xdebug, here’s a sample of some settings for your configuration ‘.ini’ file.

The demo is here.


Tags: , , , , , , ,
Permalink: 20130520.debugging.php.with.xdebug

Mon, 13 May 2013

Zsh and hash

Documentation for this one seems a bit hard to come by but it is one of the things I love about Zsh.

I’ve seen many .bashrc files that have things like:
alias www='cd /var/www'
alias music='cd /home/j0rg3/music'

And that’s a perfectly sensible way to make life a little easier, especially if the paths are very long.

In Zsh, however, we can use the hash command and the shortcut we get from it works fully as the path. Other words, using the version above, if we want to edit ‘index.html’ in the ‘www’ directory, we would have to issue the shortcut to get there and then edit the file, in two steps:
> www
> vim index.html

The improved version in .zshrc would look like:
hash www=/var/www
hash -d www=/var/www

Then, at any time, you can use tilde (~) and your shortcut in place of path.
> vim ~www/index.html

Even better, it integrates with Zsh’s robust completions so you can, for example, type cd ~www/ and then use the tab key to cycle through subdirectories and files.

On this system, I’m using something like this:
(.zshrc)
hash posts=/home/j0rg3/weblog/posts
hash -d posts=/home/j0rg3/weblog/posts

Then we can make a function to create a new post, to paste into .zshrc. Since we want to be able to edit and save, without partial posts becoming visible, while we are working, we’ll use an extra .tmp extension at the end:
post() { vim ~posts/`date +%Y-%m`/`date +%Y%m%d`.$1.txt.tmp }

[ In-line date command unfamiliar? See earlier explanation ]

But, surely there is going to be a point when we need to save a post and finish it later. For now, let’s assume that only a single post will be in limbo at any time. We definitely don’t want to have to remember the exact name of the post — and we don’t want to have hunt it down every time.

We can make those things easier like this:
alias resume="vim `find ~posts/ -name '*.txt.tmp'`"

Now, we can just enter resume and the system will go find the post we were working on and open it up for us to finish. The file will need the extension renamed from .txt.tmp to only .txt to publish the post but, for the sake of brevity, we’ll think about that (and having multiple posts in editing) on another day.


Tags: , , , ,
Permalink: 20130513.zsh.and.hash

Tue, 07 May 2013

Welcome, traveler.

Thanks for visiting my little spot on the web. This is a Blosxom ‘blog which, for those who don’t know, is a CGI written in Perl using the file-system (rather than a database).

To the CLI-addicted, this is an awesome little product. Accepting, of course, that you’re going to get under the hood if you’re going to make it the product you want. After some modules and hacking, I’m pleased with the result.

My posts are just text files, meaning I start a new one like: vim ~posts/`date +%Y%m%d`.brief.subject.txt

Note: the back-ticks (`) tell the system that you want to execute the command between ticks, and dynamically insert its output into the command. In this case, the command date with these parameters:
  1. (+) we’re going to specify a format
  2. (%Y) four-digit year
  3. (%m) two-digit month
  4. (%d) two-digit day
That means the command above will use Vim to edit a text file named ‘20130507.brief.subject.txt’ in the directory I have assigned to the hash of ‘posts’. (using hash this way is a function of Zsh that I’ll cover in another post)

In my CLI-oriented ‘blog, I can sprinkle in my own HTML or use common notation like wrapping a word in underscores to have it underlined, forward-slashes for italics and asterisks for bold.

Toss in a line that identifies tags and, since Perl is the beast of Regex, we pick up the tags and make them links, meta-tags, etc.

Things here are likely to change a lot at first, while I twiddle with CSS and hack away at making a Blosxom that perfectly fits my tastes — so don’t be too alarmed if you visit and things look a tad wonky. It just means that I’m tinkering.

Once the saw-horses have been tucked away, I’m going to take the various notes I’ve made during my years in IT and write them out, in a very simple breakdown, aimed at sharing these with people who know little about how to negotiate the command line. The assumption here is that you have an interest in *nix/BSD. If you’ve that and the CLI is not a major part of your computing experience, it probably will be at some point. If you’re working on systems remotely, graphical interfaces often just impede you.

Once you’ve started working on remote machines, the rest is inevitable. You can either remember how to do everything two ways, through a graphical interface and CLI — or just start using the CLI for everything.

So let’s take a little journey through the kinds of things that make me love the CLI.


Tags: , , , , , , , , ,
Permalink: 20130507.greetings