c0d3 :: j0rg3

A collection of tips, tricks and snips. A proud Blosxom weblog. All code. No cruft.

Thu, 13 Jul 2017

Improved Anonymity on Kali Linux

I’m not entirely certain when BackTrack/Kali began behaving more like a regular desktop distro but I seem to recall that originally, networking subsystems were down when you booted up into Run Level 3. It was up to you to turn on the interfaces and fire up a GUI if such was desired. IMO, that’s precisely how it should be. I get it. Most of us aren’t ever won’t ever find ourselves in a clandestine lot, inside of a snack and caffeine filled, non-descript, conversion van with a Yagi pointed at the bubble-window, ready to pilfer innocent datums just trying to get by in this lossy-protocoled, collision-rife, world.

Rather, very many of us just want the stinking box online so we can run through our tutorials and hack our own intentionally vulnerable VMs. A thorough taste of hacking’s un-glamorous underbelly is quite enough for many.

I’m confident that the BT fora were inundated with fledgling hackers complaining that their fresh install couldn’t find WiFi or didn’t load the desktop. However, I feel that distros dedicated to the Red Team should try to instill good habits. Having your machine boot and activate an interface announcing your presence and spewing out MAC and hostname is bad for business. Booting into a (comparatively) heavy GUI is also not where I want to begin.

Let’s imagine that we’re trying to crack into a thing. Don’t we want to apply maximal CPU resources, rather than having GUI elements bringing little beyond cost? If you notice, very many of the related tools still live on the CLI. The typical course of development (e.g.: Nmap, Metasploit) is that the CLI version is thoroughly developed before someone drops a GUI atop (respectively: Zenmap, Armitage).


So let’s take our Kali and make a few quick changes. We want to boot up in text/CLI mode and we want networking left off until we choose to make noise. Further, we want to randomize our MAC address and hostname at every boot.

We’ll use iwconfig to enumerate our wireless interfaces.
lo        no wireless extensions.

wlan1     IEEE 802.11 ESSID:"ESSID"
          Mode:Managed Frequency:2.412 GHz Access Point: 17:23:53:96:BE:67
          Bit Rate=72.2 Mb/s Tx-Power=20 dBm
          Retry short limit:7 RTS thr:off Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=70/70 Signal level=-21 dBm
          Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
          Tx excessive retries:253 Invalid misc:400 Missed beacon:0

eth0      no wireless extensions.

wlan0     IEEE 802.11 ESSID:off/any
          Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
          Retry short limit:7 RTS thr:off Fragment thr:off
          Encryption key:off
          Power Management:on

We have two wireless interfaces: wlan0, wlan1

Okay, first let’s configure to start up in text mode:
> systemctl set-default multi-user.target
Created symlink /etc/systemd/system/default.target → /lib/systemd/system/multi-user.target.

Traditionally from text mode, we bring up the GUI desktop with the command startx. Since we don’t yet have that command, let’s create it:
> echo "systemctl start gdm3.service" > /usr/sbin/startx && chmod +x /usr/sbin/startx

Disable network-manager autostart:
> systemctl disable network-manager.service
> sed -i 's/5min/30sec/' /etc/systemd/system/network-online.target.wants/networking.service

Now, let’s randomize our hostname and MAC addresses at every boot by adding some cronjobs:
> crontab -e

We’ll add two jobs to randomize MAC address and one for our host name:
@reboot macchanger -r wlan0
@reboot macchanger -r wlan1
@reboot hostname `strings /dev/urandom | grep -o '[[:alnum:]]' | head -n 30 | tr -d '\n'`

We ‘re good! We’ve improved efficiency by staving off the GUI for when we genuinely want it and improved anonymity by randomizing some common ways of identifying the rig.


Tags: , , , , , , , ,
Permalink: 2017-07-10.improved.anonymity.on.kali.linux

Sat, 04 Mar 2017

Official(ish) deep dark onion code::j0rg3 mirror

Recently I decided that I wanted my blog to be available inside of the Deep, Dark Onion (Tor).

First time around, I set up a proxy that I modified to access only the clear web version of the blog and to avail that inside Tor as a ‘hidden service’.

My blog is hosted on equipment provided by the kind folk at insomnia247.nl and I found that, within a week or so, the address of my proxy was blocked. It’s safe for us to assume that it was simply because of the outrageous popularity it received inside Tor.

By “safe for us to assume” I mean that it is highly probable that no significant harm would come from making that assumption. It would not be a correct assumption, though.

What’s more true is that within Tor things are pretty durn anonymous. Your logs will show Tor traffic coming from 127.0.0.1 only. This is a great situation for parties that would like to scan sites repeatedly looking for vulnerabilities — because you can’t block them. They can scan your site over and over and over. And the more features you have (e.g., comments, searches, any form of user input), the more attack vectors are plausible.

So why not scan endlessly? They do. Every minute of every hour.

Since insomnia247 is a provider of free shells, it is incredibly reasonable that they don’t want to take the hit for that volume of traffic. They’re providing this service to untold numbers of other users, blogs and projects.

For that reason, I decided to set up a dedicated mirror.

Works like this: my blog lives here. I have a machine at home which uses rsync to make a local copy of this blog. Immediately thereafter it rsyncs any newly gotten data up to the mirror in onionland.

After consideration, I realized that this was also a better choice just in case there is something exploitable in my blog. Instead of even risking the possibility that an attacker could get access to insomnia247, they can only get to my completely disposable VPS which has hardly anything on it except this blog and a few scripts to which I’ve already opened the source code.

I’ve not finished combing through but I’ve taken efforts to ensure it doesn’t link back to clear web. To be clear, there’s nothing inherently wrong with that. Tor users will only appear as the IP address of their exit node and should still remain anonymous. To me, it’s just onion etiquette. You let the end-user decide when they want to step outside.

To that end, the Tor mirror does not have the buttons to share to Facebook, Twitter, LinkedIn, Google Plus.

That being said, if you’re a lurker of those Internet back-alleys then you can find the mirror at: http://aacnshdurq6ihmcs.onion

Happy hacking, friends!


Tags: , , , , , , , , , , ,
Permalink: 20170304.deep.dark.onion

Tue, 20 Dec 2016

Kicking the Crypto-tires

Some time ago I had begun work on my own Pastebin-type project with a few goals. Basically, I wanted to eat all the cakes — and have them too.

  • Both an online user interface and efficient CLI usage
  • Messages encrypted immediately such that database access does not provide one with the contents of the messages
  • Messages capable of self-destructing
  • Database schema that would allow rebuilding the user/message relationship, provided the same password but would not store those relationships
  • Also, JavaScript encryption to appeal to users who don’t know much about cryptography but would like to try
  • The project, honestly, was going swimmingly when derailed by the goings-on of life.

    One of the interesting components of the project was, of course, choosing crypto implementations. There are know shortcomings to handling it in JS but that’s still the most convenient for some users. Outside of the browser, server-side, you had all the same questions about which solution was best. Which protocol(s) should be available?

    Well, I’ve just learned about a project which I would have loved to have available back then. Project Wycheproof can help you test your crypto solutions against known problems and attacks. Featuring 80 tests probing at 40 known bugs, here’s a snip from the introduction:

    Project Wycheproof has tests for the most popular crypto algorithms, including

  • AES-EAXAES-GCM
  • AES-GCM
  • DH
  • DHIES
  • DSA
  • ECDH
  • ECDSA
  • ECIES
  • RSA
  • The tests detect whether a library is vulnerable to many attacks, including

  • Invalid curve attacks
  • Biased nonces in digital signature schemes
  • Of course, all Bleichenbacher’s attacks
  • And many more — we have over 80 test cases
  • Interesting stuff with exciting potential!


    Tags: , ,
    Permalink: 20161220.kicking.the.crypto.tires

    Sat, 25 Jan 2014

    Network-aware Synergy client

    My primary machines are *nix or BSD variants, though I certainly have some Windows-based rigs also. Today we’re going to share some love with Windows 7 and PowerShell.

    One of my favorite utilities is Synergy. If you’re not already familiar it allows to you seamlessly move from the desktop of one computer to another with the same keyboard and mouse. It even supports the clipboard so you might copy text from a GNU/Linux box and paste it in a Windows’ window. Possibly, they have finished adding drag and drop to the newer versions. I am not sure because I run a relatively old version that is supported by all of the machines that I use regularly.

    What’s the problem, then? The problem was that I was starting my Synergy client by hand. Even more disturbing, I was manually typing the IP address at work and at home, twice or more per weekday. This behavior became automated by my brain and continued for months unnoticed. But this is no kind of life for a geek such as myself, what with all this superfluous clicking and tapping!

    Today, we set things right!

    In my situation, the networks that I use happen to assign IP addresses from different subnets. If you’ve not the convenience of that situation then you might need to add something to the script. Parsing an ipconfig/ifconfig command, you could possibly use something like the Default Gateway or the Connection-specific DNS Suffix. Alternatively, you could check for the presence of some network share, a file on server or anything that would allow you to uniquely identify the surroundings.

    As I imagined it, I wanted the script to accomplish the following things

    • see if Synergy is running (possibly from the last location), if so ask if we need to kill it and restart so we can identify a new server
    • attempt to locate where we are and connect to the correct Synergy server
    • if the location is not identified, ask whether to start the Synergy client

    This is how I accomplished that task:

    # [void] simply supresses the noise made loading 'System.Reflection.Assembly'
    [void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")

    # Define Synergy server IP addresses
    $synergyServerWork = "192.168.111.11"
    $synergyServerHome = "192.168.222.22"

    # Define partial IP addresses that will indicate which server to use
    $synergyWorkSubnets = "192.168.111", "192.168.115"
    $synergyHomeSubnets = "192.168.222", "192.168.225"

    # Path to Synergy Client (synergyc)
    $synergyClientProgram = "C:\Program Files\Synergy\synergyc.exe"

    # Path to Syngery launcher, for when we cannot identify the network
    $synergyLauncherProgram = "C:\Program Files\Synergy\launcher.exe"

    # Remove path and file extension to give us the process name
    $processName = $synergyClientProgram.Substring( ($synergyClientProgram.lastindexof("\") + 1), ($synergyClientProgram.length - ($synergyClientProgram.lastindexof("\") + 5) ))

    # Grab current IP address
    $currentIPaddress = ((ipconfig | findstr [0-9].\.)[0]).Split()[-1]

    # Find the subnet of current IP address
    $location = $currentIPaddress.Substring(0,$currentIPaddress.lastindexof("."))


    function BalloonTip ($message)
    {
    # Pop-up message from System Tray
    $objNotifyIcon = New-Object System.Windows.Forms.NotifyIcon
    $objNotifyIcon.Icon = [System.Drawing.Icon]::ExtractAssociatedIcon($synergyClientProgram)
    $objNotifyIcon.BalloonTipText = $message
    $objNotifyIcon.Visible = $True
    $objNotifyIcon.ShowBalloonTip(15000)
    }


    #main

    # If Synergy client is already running, do we need to restart it?
    $running = Get-Process $processName -ErrorAction SilentlyContinue
    if ($running) {
    $answer = [System.Windows.Forms.MessageBox]::Show("Synergy is running.`nClose and start again?", "OHNOES", 4)
    if ($answer -eq "YES") {
    Stop-Process -name $processName
    }
    Else {
    exit
    }
    }

    # Do we recognize the current network?
    if ($synergyWorkSubnets -contains $location) {
    BalloonTip "IP: $($currentIPaddress)`nServer: $($synergyServerWork)`nConnecting to Synergy server at work."
    & $synergyClientProgram $synergyServerWork
    exit
    }
    ElseIf ($synergyHomeSubnets -contains $location) {
    BalloonTip "IP: $($currentIPaddress)`nServer: $($synergyServerHome)`nConnecting to Synergy server at home."
    & $synergyClientProgram $synergyServerHome
    exit
    }
    Else {
    $answer = [System.Windows.Forms.MessageBox]::Show("Network not recognized by IP address: {0}`n`nLaunch Synergy?" -f $unrecognized, "OHNOES", 4)
    if ($answer -eq "YES") {
    & $synergyLauncherProgram
    }
    }

    Then I saved the script in "C:\Program Files\SynergyStart\", created a shortcut and used the Change Icon button to make the same as Synergy’s and made the Target:
    C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -WindowStyle Hidden & 'C:\Program Files\SynergyStart\synergy.ps1'

    Lastly, I copied the shortcut into the directory of things that run when the system starts up:
    %APPDATA%\Microsoft\Windows\Start Menu\Programs\Startup

    Now, Synergy connects to the needed server at home and work. If it can’t figure out where it is, it asks if it should run it at all.

    As they say, a millisecond saved is a millisecond earned.

    This post was very nearly published without a Linux equivalent. Nearly.

    Same trick for bash/zsh: #!/bin/zsh

    # Define Synergy server IP addresses
    synergyServerWork="192.168.111.11"
    synergyServerHome="192.168.222.22"

    # Define partial IP addresses that will indicate which server to use
    synergyWorkSubnets=("192.168.111" "192.168.115")
    synergyHomeSubnets=("192.168.222" "192.168.225")

    # Path to Synergy Client (synergyc)
    synergyClientProgram="/usr/bin/synergyc"

    # Path to QuickSyngery, for when we cannot identify the network
    synergyLauncherProgram="/usr/bin/quicksynergy"

    # Remove path and file extension to give us the process name
    processName=`basename $synergyClientProgram`

    # Grab current IP address, assumes '192' is in use. (e.g., 192.168.1.1)
    currentIPaddress=`ip addr show | grep 192 | awk "{print $2}" | sed 's/inet //;s/\/.*//;s/ //g'`

    # Find the subnet of current IP address
    location=`echo $currentIPaddress | cut -d '.' -f 1,2,3`

    for i in "${synergyWorkSubnets[@]}"
    do
    if [ "${i}" = "${location}" ]
    then
    break
    fi
    done

    #main

    # If Synergy client is already running, do we need to restart it?
    running=`ps ax | grep -v grep | grep $processName`
    if [ $running ]
    then
    if `zenity --question --ok-label="Yes" --cancel-label="No" --text="Synergy is running.\nClose and start again?"`
    then
    pkill $processName
    else
    exit
    fi
    fi

    # Do we recognize the current network?
    for i in "${synergyWorkSubnets[@]}"
    do
    if [ "${i}" = "${location}" ]
    then
    notify-send "IP:$currentIPaddress Server:$synergyServerWork [WORK]"
    $synergyClientProgram $synergyServerWork
    exit
    fi
    done

    for i in "${synergyHomeSubnets[@]}"
    do
    if [ "${i}" = "${location}" ]
    then
    notify-send "IP:$currentIPaddress Server:$synergyServerWork [HOME]"
    $synergyClientProgram $synergyServerHome
    exit
    fi
    done

    if `zenity --question --ok-label="Yes" --cancel-label="No" --text="Network not recognized by IP address: $currentIPaddress\nLaunch Synergy?"`
    then
    $synergyLauncherProgram
    fi

    To get it to run automatically, you might choose to call the script from /etc/init.d/rc.local.

    Download here:
      PowerShell:
        synergy.ps1
      GNU/Linux:
        synergy.sh


    Tags: , ,
    Permalink: 20140125.network_aware_synergy_client

    Thu, 13 Jun 2013

    Blogitechture continued… Simplify with Vim

    Last we were discussing the structure and design of your own CLI-centric blog platform, we had some crude methods of starting and resuming posts before publishing.

    Today, let’s explore a little more into setting up a bloging-friendly environment because we need to either make the experience of blogging easy or we’ll grow tired of the hassle and lose interest.

    We can reasonably anticipate that we won’t want to beleaguered with repetitious typing of HTML bits. If we’re going to apply paragraph tags, hyperlinks, codeblocks, etc. with any frequency, that task is best to be simplified. Using Vim as our preferred editor, we will use Tim Pope’s brilliant plug-ins ‘surround’ and ‘repeat’, combined with abbreviations to take away the tedium.

    The plug-ins just need dropped into your Vim plugin directory (~/.vim/plugin/). The directory may not exist if you don’t have any plug-ins yet. That’s no problem, though. Let’s grab the plugins:

    cd ~/.vim/
    wget "http://www.vim.org/scripts/download_script.php?src_id=19287" -O surround.zip
    wget "http://www.vim.org/scripts/download_script.php?src_id=19285" -O repeat.zip

    Expand the archives into the appropriate directories:

    unzip surround.zip
    unzip repeat.zip

    Ta-da! Your Vim is now configured to quickly wrap (surround) in any variety of markup. When working on a blog, you might use <p> tags a lot by putting your cursor amid the paragraph and typing yss<p>. The plug-in will wrap it with opening and closing paragraph tags. Move to your next paragraph and then press . to repeat.

    That out of the way, let’s take advantage of Vim’s abbreviations for some customization. In our .vimrc file, we can define a few characters that Vim will expand according to their definition. For example, you might use:
    ab <gclb> <code class="prettyprint lang-bsh linenums:1">
    Then, any time you type <gclb> and bress <enter>, you’ll get:
    <code class="prettyprint lang-bsh linenums:1">

    The next time that we take a look at blogitecture, we will focus on making the posts convenient to manage from our CLI.


    Tags: , , , ,
    Permalink: 20130613.blogitechture.continued

    Wed, 08 May 2013

    Deleting backup files left behind by Vim

    It’s generally a great idea to have Vim keep backups. Once in awhile, they can really save your bacon.

    The other side of that coin, though, is that they can get left behind here and there, eventually causing aggravation.

    Here’s a snippet to find and eliminate those files from the current directory down:

    find ./ -name '*~' -exec rm '{}' \; -print -or -name ".*~" -exec rm {} \; -print
    This uses find from the current directory down (./) to execute an rm statement on all files with an extension ending in tilde (~)
    Alternatively, you could just store your backups elsewhere. In Vim, use :help backupdir for more information.


    Tags: , , , ,
    Permalink: 20130508.delete.vim.backups

    Tue, 07 May 2013

    Welcome, traveler.

    Thanks for visiting my little spot on the web. This is a Blosxom ‘blog which, for those who don’t know, is a CGI written in Perl using the file-system (rather than a database).

    To the CLI-addicted, this is an awesome little product. Accepting, of course, that you’re going to get under the hood if you’re going to make it the product you want. After some modules and hacking, I’m pleased with the result.

    My posts are just text files, meaning I start a new one like: vim ~posts/`date +%Y%m%d`.brief.subject.txt

    Note: the back-ticks (`) tell the system that you want to execute the command between ticks, and dynamically insert its output into the command. In this case, the command date with these parameters:
    1. (+) we’re going to specify a format
    2. (%Y) four-digit year
    3. (%m) two-digit month
    4. (%d) two-digit day
    That means the command above will use Vim to edit a text file named ‘20130507.brief.subject.txt’ in the directory I have assigned to the hash of ‘posts’. (using hash this way is a function of Zsh that I’ll cover in another post)

    In my CLI-oriented ‘blog, I can sprinkle in my own HTML or use common notation like wrapping a word in underscores to have it underlined, forward-slashes for italics and asterisks for bold.

    Toss in a line that identifies tags and, since Perl is the beast of Regex, we pick up the tags and make them links, meta-tags, etc.

    Things here are likely to change a lot at first, while I twiddle with CSS and hack away at making a Blosxom that perfectly fits my tastes — so don’t be too alarmed if you visit and things look a tad wonky. It just means that I’m tinkering.

    Once the saw-horses have been tucked away, I’m going to take the various notes I’ve made during my years in IT and write them out, in a very simple breakdown, aimed at sharing these with people who know little about how to negotiate the command line. The assumption here is that you have an interest in *nix/BSD. If you’ve that and the CLI is not a major part of your computing experience, it probably will be at some point. If you’re working on systems remotely, graphical interfaces often just impede you.

    Once you’ve started working on remote machines, the rest is inevitable. You can either remember how to do everything two ways, through a graphical interface and CLI — or just start using the CLI for everything.

    So let’s take a little journey through the kinds of things that make me love the CLI.


    Tags: , , , , , , , , ,
    Permalink: 20130507.greetings