c0d3 :: j0rg3

A collection of tips, tricks and snips. A proud Blosxom weblog. All code. No cruft.

Tue, 07 Mar 2017

Privacy Part II: VPN/IPVanish - Install IPVanish on Kali Linux

Okay, so you’re running Whonix, Tails or, at least, TorBrowser.

What’s next? You may wish to consider using a VPN. In simple terms, it’s somewhat similar to what Tor offers. That is: you connect to the VPN and your connection passes through them such that the site that you are visiting will see the VPN’s IP address rather than yours. Of course, that means that you can chain them.

That is: (You)->VPN->Tor->Exit node->Web site

The reason that you might feel compelled to take this step is that a party which is able to see your traffic into and out of Tor could still identify you. The thinking is that the parties who wish to interfere with your privacy could be compelled to run Tor bridges, relays and exit nodes. If traffic from your IP address could be matched to requests coming from the Tor exit node then you could, effectively, be identified.

Some people hold that using a VPN to access Tor does not improve your anonymousness. I am not among them. In particular, you will find that IPVanish offers VPN service for under $7 per month and is popular among users of the Tor network. Which means that in addition to the fact that IPVanish is not logging your traffic, there’s an excellent chance that other users are going from IPVanish into Tor, helping to reduce the uniqueness of your traffic.

By the way, I’d suggest poking around the web a little bit. While their prices are already great you can find some even deeper discounts: https://signup.ipvanish.com/?aff=vpnfan-promo

IPVanish’s site offers instructions for installing the VPN in Ubuntu so we’re going to take a look at using IPVanish in Kali — including an interesting and unanticipated snag (and, of course, how to fix it).

Let’s grab the OpenVPN configuration:
wget http://www.ipvanish.com/software/configs/ca.ipvanish.com.crt; wget http://www.ipvanish.com/software/configs/ipvanish-US-New-York-nyc-a01.ovpn

We will need the OpenVPN package for Gnome:
apt install network-manager-openvpn-gnome

Click on the tray in the upper right corner, then the wrench/screwdriver icon:

Select the ‘Network’ folder icon:

We’re choosing ‘Wired’ (even though we’re using wlan0 interface):

We’re setting up a VPN, of course:

Import from file:

Choose the configuration file that we downloaded previously:

Enter ‘User name’ and ‘Password’:

We are connected!

Verified at IPVanish’s site: https://www.ipvanish.com/checkIP.php

And this is where I had anticipated the installation instructions would end.

I just wanted to check a few more things. And I would love to tell you that it was simply my thoroughness and unbridled CLI-fu that led to discover that I was still making ipv6 connections outside of the VPN. Seems that it wasn’t noticed by the test at IPVanish because they deal only in ipv4. I was able to prove my ipv6 address and geolocation by using: http://whatismyipaddress.com/

Further, we can establish that the test at IPVanish is not ipv6-compatible with a quick test.

The easy fix here is to disable ipv6 locally. It is plausible that this could cause unintended consequences and, to be thorough, it would be best to handle your VPN at the firewall. Having support for OpenVPN, you’ll be able to get this running with a huge variety of routing/firewall solutions. You can grab any number of tiny computers and build a professional-quality firewall solution with something like pfSense. Maybe we’ll take a look at getting that configured in a future post.

But, for now, let’s shut down ipv6 in a way that doesn’t involve any grandiose hand-waving magic (i.e., unexplained commands which probably should work) and then test to get confidence in our results.

Let’s use sysctl to find our ipv6 kernel bits and turn them off. Then we’ll load our configuration changes. As a safety, it wouldn’t be a bad idea to look in /etc/sysctl.conf to verify that there aren’t any ipv6 configs in there.

We’ll back up our config file then turn off everything ipv6 by listing everything with the words ‘ipv6’ and ‘disable’:
cp /etc/sysctl.conf /etc/$(date +%Y-%m-%d.%H-%M-%S).sysctl.conf.bak && \
sysctl -a | grep -i ipv6 | grep disable | sed 's/0/1/g' >> /etc/sysctl.conf && \
sysctl -p

To explain what we’re doing:
List all kernel flags; show uonly those containing the string ‘ipv6’; of those that remain, show only those that contain the string ‘disable’:
sysctl -a | grep -i ipv6 | grep disable
Replace the 0 values with 1, to turn ON the disabling, by piping output to:
sed 's/0/1/g'
That all gets stuck on the end of ‘sysctl.conf’ by redirecting stdout to append to the end of that file:
>> /etc/sysctl.conf
Then we reload with:
sysctl -p

Then as a final sanity-check we’ll make sure we can’t find any ipv6 packets sneaking about:
tcpdump -t -n -i wlan0 -s 256 -vv ip6

At this point, assuming our tcpdump doesn’t show any traffic, we should be ipv6-free with all of our ipv4 traffic shipped-off nicely through IPVanish!


Tags: , , , , , , , , , , , , ,
Permalink: 20170307.privacy.vpn.ipvanish

Fri, 17 Feb 2017

The making of a Docker: Part I - Bitmessage GUI with SSH X forwarding

Lately, I’ve been doing a lot of work from a laptop running Kali. Engaged in pursuit of a new job, I’m brushing up on some old tools and skills, exploring some bits that have changed.

My primary desktop rig is currently running Arch because I love the fine grain control and the aggressive releases. Over the years, I’ve Gentoo’d and Slacked, Crunchbanged, BSD’d, Solarised, et cet. And I’ve a fondness for all of them, especially the security-minded focus of OpenBSD. But, these days we’re usually on Arch or Kali. Initially, I went with Black Arch on the laptop but I felt the things and ways I was fixing things were too specific to my situation to be good material for posts.

Anyway, I wanted to get Bitmessage running, corresponding to another post I have in drafts. On Kali, it wasn’t going well so I put it on the Arch box and just ran it over the network. A reasonable solution if you’re in my house but also the sort of solution that will keep a hacker up at night.

If you’re lucky, there’s someone maintaining a package for the piece of software that you want to run. However, that’s often not the case.

If I correctly recall, to “fix” the problem with Bitmessage on Kali would’ve required the manual installation an older version of libraries that were already present. Those libraries should, in fact, be all ebony and ivory, living together in harmony. However, I just didn’t love the idea of that solution. I wanted to find an approach that would be useful on a broader scale.

Enter containerization/virtualization!

Wanting the lightest solution, I quickly went to Docker and realized something. I have not before built a Docker container for a GUI application. And Bitmessage’s CLI/daemon mode doesn’t provide the fluid UX that I wanted. Well, the easy way to get a GUI out of a Docker container is to forward DISPLAY as an evironment variable (i.e., docker run -e DISPLAY=$DISPLAY). Splendid!

Except that it doesn’t work on current Kali which is using QT4. There’s a when graphical apps are run as root and though it is fixed in QT5, we are using current Kali. And that means we are, by default, uid 0 and QT4.

I saw a bunch of workarounds that seemed to have spotty (at best) rates of success including seting QT’s graphics system to Native and giving Xorg over to root. They, mostly, seemed to be cargo cult solutions.

What made the most sense to my (generally questionable) mind was to use X forwarding. Since I had already been running Bitmessage over X forwarding from my Arch box, I knew it should work just the same.

To be completely truthful, the first pass I took at this was with Vagrant mostly because it’s SO easy. Bring up your Vagrant Box and then:
vagrant ssh -- -X
Viola!

Having proof of concept, I wanted a Docker container. The reason for this is practical. Vagrant, while completely awesome, has substantially more overhead than Docker by virtualizing the kernel. We don’t want a separate kernel running for each application. Therefore Docker is the better choice for this project.

Also, we want this whole thing to be seemless. We want to run the command bitmessage and it should fire up with minimal awkwardness and hopefully no extra steps. That is we do not want to run the Docker container then SSH into it and execute Bitmessage as individual steps. Even though that’s going to be how we begin.

The Bitmessage wiki accurately describes how to install the software so we’ll focus on the SSH setup. Though when we build the Dockerfile we will need to add SSH to the list from the wiki.

We’re going to want the container to start so that the SSH daemon is ready. Until then we can’t SSH (with X forwarding) into the container. Then we’ll want to use SSH to kick off the Bitmessage application, drawing the graphical interface using our host system’s X11.

We’re going to take advantage of Docker’s -v --volume option which allows us to specify a directory on our host system to be mounted inside our container. Using this feature, we’ll generate our SSH keys on the host and make them automatically available inside the container. We’ll tuck the keys inside the directory that Bitmessage uses for storing its configuration and data. That way Bitmessage’s configuration and stored messages can be persistent between runs — and all of your pieces are kept in a single place.

When we generate the container /etc/ssh/sshd_config is configured to allow root login without password only (i.e., using keys). So here’s how we’ll get this done:
mkdir -p ~/.config/PyBitmessage/keys #Ensure that our data directories exist
cd ~/.config/PyBitmessage/keys
ssh-keygen -b 4096 -P "" -C $"$(whoami)@$(hostname)-$(date -I)" -f docker-bitmessage-keys #Generate our SSH keys
ln -fs docker-bitmessage-keys.pub authorized_keys #for container to see pubkey

Build our container (sources available at Github and Docker) and we’ll make the script to handle Bitmessage to our preferences. #!/bin/bash
# filename: bitmessage
set -euxo pipefail

# open Docker container:
# port 8444 available, sharing local directories for SSH and Bitmessage data
# detatched, interactive, pseudo-tty (-dit)
# record container ID in $DID (Docker ID)
DID=$(docker run -p 8444:8444 -v ~/.config/PyBitmessage/:/root/.config/PyBitmessage -v ~/.config/PyBitmessage/keys/:/root/.ssh/ -dit j0rg3/bitmessage-gui bash)

# find IP address of new container, record in $DIP (Docker IP)
DIP=$(docker inspect $DID | grep IPAddress | cut -d '"' -f 4)

# pause for one second to allow container's SSHD to come online
sleep 1

# SSH into container and execute Bitmessage
ssh -oStrictHostKeyChecking=no -oUserKnownHostsFile=/dev/null -oIdentityFile=~/.config/PyBitmessage/keys/docker-bitmessage-keys -X $DIP ./PyBitmessage/src/bitmessagemain.py

# close container if Bitmessage is closed
docker kill $DID

Okay, let’s make it executable: chmod +x bitmessage

Put a link to it where it can be picked up system-wide: ln -fs ~/docker-bitmessage/bitmessage /usr/local/bin/bitmessage

There we have it! We now have a functional Bitmessage inside a Docker container. \o/

In a future post we’ll look at using eCryptfs to further protect our Bitmessage data stores.

  Project files: Github and Docker


Tags: , , , , , , , , , , ,
Permalink: 20170217.making.a.docker.bitmessage

Wed, 26 Jun 2013

Terminal suddenly Chinese

The other day, I was updating one of my systems and I noticed that it had decided to communicate with me in Chinese. Since I don’t know a lick of Chinese, it made for a clumsy exchange.

It was Linux Mint (an Ubuntu variant), so a snip of the output from an ‘apt-get upgrade’ looked like this: terminal screen with Chinese characters

I’m pretty sure I caused it — but there’s no telling what I was working on and how it slipped past me. Anyway, it’s not a difficult problem to fix but I imagine it could look like big trouble.

So, here’s what I did:
> locale

The important part of the output was this:
LANG=en_US.UTF-8
LANGUAGE=zh_CN.UTF-8

If you want to set your system to use a specific editor, you can set $EDITOR=vi and then you’re going to learn that some programs expect the configuration to be set in $VISUAL and you’ll need to change it there too.

In a similar way, many things were using the en_US.UTF-8 set in LANG, but other things were looking to LANGUAGE and determining that I wanted Chinese.

Having identified the problem, the fix was simple. Firstly, I just changed it in my local environment:
> LANGUAGE=en_US.UTF-8

That solved the immediate problem but, sooner or later, I’m going to reboot the machine and the Chinese setting would have come back. I needed to record the change somewhere for the system to know about it in the future.

> vim /etc/default/locale

Therein was the more permanent record, so I changed LANGUAGE there also, giving the result:

LANG=en_US.UTF-8
LANGUAGE=en_US.UTF-8
LC_CTYPE=en_US.UTF-8
LC_NUMERIC=en_US.UTF-8
LC_TIME=en_US.UTF-8
LC_COLLATE=”en_US.UTF-8”
LC_MONETARY=en_US.UTF-8
LC_MESSAGES=”en_US.UTF-8”
LC_PAPER=en_US.UTF-8
LC_NAME=en_US.UTF-8
LC_ADDRESS=en_US.UTF-8
LC_TELEPHONE=en_US.UTF-8
LC_MEASUREMENT=en_US.UTF-8
LC_IDENTIFICATION=en_US.UTF-8
LC_ALL=

And now, the computer is back to using characters that I (more-or-less) understand.


Tags: , , , , ,
Permalink: 20130626.terminal.suddenly.chinese

Thu, 30 May 2013

Making ixquick your default search engine

In this writer’s opinion, it is vitally important that we take reasonable measures now to help insure anonymity, lest we create a situation where privacy no longer exists, and the simple want of, becomes suspicious.

Here’s how to configure your browser to automatically use a search engine that respects your privacy.

Chrome:

  1. Click Settings.
  2. Click “Set pages” in the “On startup” section.
  3. Enter https://ixquick.com/eng/ in the “Add a new page” text field.
  4. Click OK.
  5. Click “Manage search engines…”
  6. At the bottom of the “Search Engines” dialog, click in the “Add a new search engine” field.
  7. Enter
    ixquick
    ixquick.com
    https://ixquick.com/do/search?lui=english&language=english&cat=web&query=%s
  8. Click “Make Default”.
  9. Click “Done”.

Firefox:

  1. Click the Tools Menu.
  2. Click Options.
  3. Click the General tab.
  4. In “When Firefox Starts” dropdown, select “Show my home page”.
  5. Enter https://ixquick.com/eng/ in the “Home Page” text field.
  6. Click one of the English options here.
  7. Check box for “Start using it right away.”
  8. Click “Add”.

Opera:

  1. Click “Manage Search Engines
  2. Click “Add”
  3. Enter
    Name: ixquick
    Keyword: x
    Address: https://ixquick.com/do/search?lui=english&language=english&cat=web&query=%s
  4. Check “Use as default search engine”
  5. Click “OK”

Internet Explorer:

      _     ___  _ __        ___   _ _____ ___ 
     | |   / _ \| |\ \      / / | | |_   _|__ \
     | |  | | | | | \ \ /\ / /| | | | | |   / /
     | |__| |_| | |__\ V  V / | |_| | | |  |_| 
     |_____\___/|_____\_/\_/   \___/  |_|  (_) 
    
    
    (This is not a good strategy for privacy.)

Congratulations!

\o/

You are now one step closer to not having every motion on the Internet recorded.

This is a relatively small measure, though. You can improve your resistance to prying eyes (e.g., browser fingerprinting) by using the Torbrowser Bundle, or even better, Tails, and routing your web usage through Tor, i2p, or FreeNet.

If you would like more on subjects like anonymyzing, privacy and security then drop me a line via email or Bitmessage me: BM-2D9tDkYEJSTnEkGDKf7xYA5rUj2ihETxVR


Tags: , , , , , , , , , , , , , ,
Permalink: 20130530.hey.you.get.offa.my.data