c0d3 :: j0rg3

A collection of tips, tricks and snips. A proud Blosxom weblog. All code. No cruft.

Sat, 25 Jan 2014

Network-aware Synergy client

My primary machines are *nix or BSD variants, though I certainly have some Windows-based rigs also. Today we’re going to share some love with Windows 7 and PowerShell.

One of my favorite utilities is Synergy. If you’re not already familiar it allows to you seamlessly move from the desktop of one computer to another with the same keyboard and mouse. It even supports the clipboard so you might copy text from a GNU/Linux box and paste it in a Windows’ window. Possibly, they have finished adding drag and drop to the newer versions. I am not sure because I run a relatively old version that is supported by all of the machines that I use regularly.

What’s the problem, then? The problem was that I was starting my Synergy client by hand. Even more disturbing, I was manually typing the IP address at work and at home, twice or more per weekday. This behavior became automated by my brain and continued for months unnoticed. But this is no kind of life for a geek such as myself, what with all this superfluous clicking and tapping!

Today, we set things right!

In my situation, the networks that I use happen to assign IP addresses from different subnets. If you’ve not the convenience of that situation then you might need to add something to the script. Parsing an ipconfig/ifconfig command, you could possibly use something like the Default Gateway or the Connection-specific DNS Suffix. Alternatively, you could check for the presence of some network share, a file on server or anything that would allow you to uniquely identify the surroundings.

As I imagined it, I wanted the script to accomplish the following things

  • see if Synergy is running (possibly from the last location), if so ask if we need to kill it and restart so we can identify a new server
  • attempt to locate where we are and connect to the correct Synergy server
  • if the location is not identified, ask whether to start the Synergy client

This is how I accomplished that task:

# [void] simply supresses the noise made loading 'System.Reflection.Assembly'
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")

# Define Synergy server IP addresses
$synergyServerWork = "192.168.111.11"
$synergyServerHome = "192.168.222.22"

# Define partial IP addresses that will indicate which server to use
$synergyWorkSubnets = "192.168.111", "192.168.115"
$synergyHomeSubnets = "192.168.222", "192.168.225"

# Path to Synergy Client (synergyc)
$synergyClientProgram = "C:\Program Files\Synergy\synergyc.exe"

# Path to Syngery launcher, for when we cannot identify the network
$synergyLauncherProgram = "C:\Program Files\Synergy\launcher.exe"

# Remove path and file extension to give us the process name
$processName = $synergyClientProgram.Substring( ($synergyClientProgram.lastindexof("\") + 1), ($synergyClientProgram.length - ($synergyClientProgram.lastindexof("\") + 5) ))

# Grab current IP address
$currentIPaddress = ((ipconfig | findstr [0-9].\.)[0]).Split()[-1]

# Find the subnet of current IP address
$location = $currentIPaddress.Substring(0,$currentIPaddress.lastindexof("."))


function BalloonTip ($message)
{
# Pop-up message from System Tray
$objNotifyIcon = New-Object System.Windows.Forms.NotifyIcon
$objNotifyIcon.Icon = [System.Drawing.Icon]::ExtractAssociatedIcon($synergyClientProgram)
$objNotifyIcon.BalloonTipText = $message
$objNotifyIcon.Visible = $True
$objNotifyIcon.ShowBalloonTip(15000)
}


#main

# If Synergy client is already running, do we need to restart it?
$running = Get-Process $processName -ErrorAction SilentlyContinue
if ($running) {
$answer = [System.Windows.Forms.MessageBox]::Show("Synergy is running.`nClose and start again?", "OHNOES", 4)
if ($answer -eq "YES") {
Stop-Process -name $processName
}
Else {
exit
}
}

# Do we recognize the current network?
if ($synergyWorkSubnets -contains $location) {
BalloonTip "IP: $($currentIPaddress)`nServer: $($synergyServerWork)`nConnecting to Synergy server at work."
& $synergyClientProgram $synergyServerWork
exit
}
ElseIf ($synergyHomeSubnets -contains $location) {
BalloonTip "IP: $($currentIPaddress)`nServer: $($synergyServerHome)`nConnecting to Synergy server at home."
& $synergyClientProgram $synergyServerHome
exit
}
Else {
$answer = [System.Windows.Forms.MessageBox]::Show("Network not recognized by IP address: {0}`n`nLaunch Synergy?" -f $unrecognized, "OHNOES", 4)
if ($answer -eq "YES") {
& $synergyLauncherProgram
}
}

Then I saved the script in "C:\Program Files\SynergyStart\", created a shortcut and used the Change Icon button to make the same as Synergy’s and made the Target:
C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -WindowStyle Hidden & 'C:\Program Files\SynergyStart\synergy.ps1'

Lastly, I copied the shortcut into the directory of things that run when the system starts up:
%APPDATA%\Microsoft\Windows\Start Menu\Programs\Startup

Now, Synergy connects to the needed server at home and work. If it can’t figure out where it is, it asks if it should run it at all.

As they say, a millisecond saved is a millisecond earned.

This post was very nearly published without a Linux equivalent. Nearly.

Same trick for bash/zsh: #!/bin/zsh

# Define Synergy server IP addresses
synergyServerWork="192.168.111.11"
synergyServerHome="192.168.222.22"

# Define partial IP addresses that will indicate which server to use
synergyWorkSubnets=("192.168.111" "192.168.115")
synergyHomeSubnets=("192.168.222" "192.168.225")

# Path to Synergy Client (synergyc)
synergyClientProgram="/usr/bin/synergyc"

# Path to QuickSyngery, for when we cannot identify the network
synergyLauncherProgram="/usr/bin/quicksynergy"

# Remove path and file extension to give us the process name
processName=`basename $synergyClientProgram`

# Grab current IP address, assumes '192' is in use. (e.g., 192.168.1.1)
currentIPaddress=`ip addr show | grep 192 | awk "{print $2}" | sed 's/inet //;s/\/.*//;s/ //g'`

# Find the subnet of current IP address
location=`echo $currentIPaddress | cut -d '.' -f 1,2,3`

for i in "${synergyWorkSubnets[@]}"
do
if [ "${i}" = "${location}" ]
then
break
fi
done

#main

# If Synergy client is already running, do we need to restart it?
running=`ps ax | grep -v grep | grep $processName`
if [ $running ]
then
if `zenity --question --ok-label="Yes" --cancel-label="No" --text="Synergy is running.\nClose and start again?"`
then
pkill $processName
else
exit
fi
fi

# Do we recognize the current network?
for i in "${synergyWorkSubnets[@]}"
do
if [ "${i}" = "${location}" ]
then
notify-send "IP:$currentIPaddress Server:$synergyServerWork [WORK]"
$synergyClientProgram $synergyServerWork
exit
fi
done

for i in "${synergyHomeSubnets[@]}"
do
if [ "${i}" = "${location}" ]
then
notify-send "IP:$currentIPaddress Server:$synergyServerWork [HOME]"
$synergyClientProgram $synergyServerHome
exit
fi
done

if `zenity --question --ok-label="Yes" --cancel-label="No" --text="Network not recognized by IP address: $currentIPaddress\nLaunch Synergy?"`
then
$synergyLauncherProgram
fi

To get it to run automatically, you might choose to call the script from /etc/init.d/rc.local.

Download here:
  PowerShell:
    synergy.ps1
  GNU/Linux:
    synergy.sh


Tags: , ,
Permalink: 20140125.network_aware_synergy_client

Tue, 04 Jun 2013

Painless protection with Yubico’s Yubikey

Recently, I ordered a Yubikey and, in the comments section of the order, I promised to write about the product. At the time, I assumed that there was going to be something about which to write: (at least a few) steps of setting up and configuration or a registration process. They’ve made the task of writing about it difficult, by making the process of using it so easy.

Plug it in. The light turns solid green and you push the button when you need to enter the key. That’s the whole thing!

Physically, the device has a hole for a keychain or it can slip easily into your wallet. It draws power from the USB port on the computer, so there’s none stored in the device, meaning it should be completely unfazed if you accidentally get it wet.

Let’s take a look at the device.

> lsusb | grep Yubico

Bus 005 Device 004: ID 1050:0010 Yubico.com Yubikey

We see that it is on Bus 5, Device 4. How about a closer look?

> lsusb -v -s5:4

Bus 005 Device 004: ID 1050:0010 Yubico.com Yubikey
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x1050 Yubico.com
  idProduct          0x0010 Yubikey
  bcdDevice            2.41
  iManufacturer           1 
  iProduct                2 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower               30mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      1 Keyboard
      iInterface              0 
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.11
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      71
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              10

There’s not a great deal to be seen here. As it tells you right on Yubico’s site, the device presents as a keyboard and it “types” out its key when you press the button, adding another long and complex password to combine with the long and complex password that you’re already using.

Keep in mind that this device is unable to protect you from keyloggers, some of which are hardware-based. It’s critically important that you are very, very careful about where you’re sticking your Yubikey. Even Yubico cannot protect us from ourselves.


Tags: , , , ,
Permalink: 20130604.yay.yubico.yubikey

Thu, 30 May 2013

Making ixquick your default search engine

In this writer’s opinion, it is vitally important that we take reasonable measures now to help insure anonymity, lest we create a situation where privacy no longer exists, and the simple want of, becomes suspicious.

Here’s how to configure your browser to automatically use a search engine that respects your privacy.

Chrome:

  1. Click Settings.
  2. Click “Set pages” in the “On startup” section.
  3. Enter https://ixquick.com/eng/ in the “Add a new page” text field.
  4. Click OK.
  5. Click “Manage search engines…”
  6. At the bottom of the “Search Engines” dialog, click in the “Add a new search engine” field.
  7. Enter
    ixquick
    ixquick.com
    https://ixquick.com/do/search?lui=english&language=english&cat=web&query=%s
  8. Click “Make Default”.
  9. Click “Done”.

Firefox:

  1. Click the Tools Menu.
  2. Click Options.
  3. Click the General tab.
  4. In “When Firefox Starts” dropdown, select “Show my home page”.
  5. Enter https://ixquick.com/eng/ in the “Home Page” text field.
  6. Click one of the English options here.
  7. Check box for “Start using it right away.”
  8. Click “Add”.

Opera:

  1. Click “Manage Search Engines
  2. Click “Add”
  3. Enter
    Name: ixquick
    Keyword: x
    Address: https://ixquick.com/do/search?lui=english&language=english&cat=web&query=%s
  4. Check “Use as default search engine”
  5. Click “OK”

Internet Explorer:

      _     ___  _ __        ___   _ _____ ___ 
     | |   / _ \| |\ \      / / | | |_   _|__ \
     | |  | | | | | \ \ /\ / /| | | | | |   / /
     | |__| |_| | |__\ V  V / | |_| | | |  |_| 
     |_____\___/|_____\_/\_/   \___/  |_|  (_) 
    
    
    (This is not a good strategy for privacy.)

Congratulations!

\o/

You are now one step closer to not having every motion on the Internet recorded.

This is a relatively small measure, though. You can improve your resistance to prying eyes (e.g., browser fingerprinting) by using the Torbrowser Bundle, or even better, Tails, and routing your web usage through Tor, i2p, or FreeNet.

If you would like more on subjects like anonymyzing, privacy and security then drop me a line via email or Bitmessage me: BM-2D9tDkYEJSTnEkGDKf7xYA5rUj2ihETxVR


Tags: , , , , , , , , , , , , , ,
Permalink: 20130530.hey.you.get.offa.my.data

Mon, 20 May 2013

Debugging PHP with Xdebug

I have finished (more-or-less) making a demo for the Xdebug togglin’ add-on/extension that I’ve developed.

One hundred percent of the feedback about this project has been from Chrome users. Therefore, the Chrome extension has advanced with the new features (v2.0), allowing selective en/dis-ableing portions of Xdebug’s output. That is you can set Xdebug to firehose mode (spitting out everything) and then squelch anything not immediately needed at the browser layer. The other information remains present, hidden in the background, available if you decide that you need to have a look.

The Firefox version is still at v1.2 but will be brought up to speed as time permits.

If you want that firehose mode for Xdebug, here’s a sample of some settings for your configuration ‘.ini’ file.

The demo is here.


Tags: , , , , , , ,
Permalink: 20130520.debugging.php.with.xdebug