c0d3 :: j0rg3

A collection of tips, tricks and snips. A proud Blosxom weblog. All code. No cruft.

Sat, 18 Feb 2017

The making of a Docker: Part II - Wickr: with bonus analysis

Recently, I read a rather excited attention-catching piece about how Wickr is the super-secure version of Slack. Attention caught in part because I feel like Wickr has been around for a while. I’d not seen anyone raving about its security in places where I normally interact with those who are highly informed about such subjects.

Good is that it seems the folk at Wickr did a fine job of making sure valuable data aren’t left behind.
The bad: closed-source, not subject to independent review; crazy marketin’-fancy-talk without a thorough description of how it does what is claimed.
Any time I’m looking at a product or service that boasts security, I sort of expect to see a threat model.

[ Update: At the time I was working on this project, the folk at Wickr were, evidently, opening their source. That’s spectacular news! Check it out on Github. ]

This began as an exercise to provide another piece of security-ish software in a Docker container. Anyone who has used a live distro (e.g., Kali, TAILS) with any regularity knows the ritual of installing favorite tools at each boot, data stores on removable media.

For me, there is tremendous appeal in reducing that to something like:
git clone https://georgeglarson/wickr
cd docker-wickr
./install.sh
wickr

Let’s dig in!

Having created a number of Docker containers my workflow is to queue up the base OS and go through the steps needed to get the software running while keeping careful notes. In this case, I had originally tried to install Wickr on a current copy of Kali. It was already known that Wickr, based off of Ubuntu 14.04, needed an older unicode library. So we begin with Ubuntu 14.04.

Grab a copy of Wickr and see what’s required:
dpkg -I wickr-me_2.6.0_amd64.deb

new debian package, version 2.0.
size 78890218 bytes: control archive=4813 bytes.
558 bytes, 14 lines control
558 bytes, 14 lines control64
10808 bytes, 140 lines md5sums
Package: wickr-me
Architecture: amd64
Section: net
Priority: optional
Version: 2.6.0-4
Replaces: wickr
Conflicts: wickr
Depends: libsqlcipher0, libuuid1, libicu52, libavutil52|libavutil54, libc6, libssl1.0.0, libx264-142, libglib2.0-0, libpulse0, libxrender1, libgl1-mesa-glx
Recommends: libnotify-bin, gstreamer-plugins0.10-good, gstreamer-plugins0.10-bad, gstreamer-plugins0.10-ugly
Maintainer: Wickr Inc.
Installed-Size: 200000
Description: Secure Internet Chat and Media Exchange agent
Wickr is a secure communications client

Okay. The CLI should do most of the work for us, giving a formatted list of dependencies.
dpkg -I wickr-me_2.6.0_amd64.deb | grep -E "^ Depends: | Recommends: " | sed -e "s/ Depends: //" -e "s/ Recommends: //" -e "s/,//g" -e "s/ / \\\ \n/g"

libsqlcipher0 \
libuuid1 \
libicu52 \
libavutil54 \
libc6 \
libssl1.0.0 \
libx264-142 \
libglib2.0-0 \
libpulse0 \
libxrender1 \
libgl1-mesa-glx
libnotify-bin \
gstreamer-plugins0.10-good \
gstreamer-plugins0.10-bad \
gstreamer-plugins0.10-ugly \

Attempting to get those with apt-get reports that it cannot find the gstreamer bits.

Let’s find:
apt-cache search gstreamer | grep -i plugin | grep -E "good|bad|ugly"

gstreamer0.10-plugins-good - GStreamer plugins from the "good" set
...
gstreamer0.10-plugins-bad - GStreamer plugins from the "bad" set
...
gstreamer0.10-plugins-ugly - GStreamer plugins from the "ugly" set

So, there’s the format we need to get the gstreamer dependencies. We know that we’ll also want SSH and wget. That should be enough for our Dockerfile.

We’ll pull down Wickr:
wget https://dls.wickr.com/Downloads/wickr-me_2.6.0_amd64.deb

Then install:
dpkg -i wickr-me_2.6.0_amd64.deb

Okay! We are, in theory, ready to run Wickr. We’re about to see we aren’t yet there — but these sorts of problems are pretty commonplace.
wickr-me

wickr-me: error while loading shared libraries: libxslt.so.1: cannot open shared object file: No such file or directory

Huh! We need libxslt. Let’s fix that: apt-get install libxslt1-dev

Now we can run it.
wickr-me

This application failed to start because it could not find or load the Qt platform plugin "xcb".

Available platform plugins are: eglfs, linuxfb, minimal, minimalegl, offscreen, xcb.

Reinstalling the application may fix this problem.
Aborted (core dumped)

One more: apt-get install xcb

Okay. That really was the last one. Now we have a complete list of dependencies for our Dockerfile:
RUN apt-get update && apt-get install -y \
gstreamer0.10-plugins-good \
gstreamer0.10-plugins-bad \
gstreamer0.10-plugins-ugly \
libsqlcipher0 \
libuuid1 \
libicu52 \
libavutil52 \
libc6 \
libssl1.0.0 \
libx264-142 \
libglib2.0-0 \
libpulse0 \
libxrender1 \
libxslt1-dev \
libgl1-mesa-glx \
libnotify-bin \
ssh \
wget \
xcb \
&& apt-get clean \

We now have Wickr in a Docker container and, because we are the curious sort, need to peek into what’s happening.

A natural first step is to set Wireshark atop Wickr. At a glance, seems to be communicating with a single IP address (204.232.166.114) via HTTPS.

Unsurprsingly, the client communicates to the server whenever a message is sent. Further it appears to poll the same address periodically asking for new messages. We see that the address resolves to Rackspace in San Antonio, TX.

We can easily establish the link between this IP address, Rackspace and the application.

Well, that’s enough. Right?

Good!

Wait.

What?

We’re still a little curious.

Aren’t we?

I mean, what’s the big question here? What happens if there’s a man in the middle? Persons so eagerly connect to any free WIFI, it is clearly a plausible scenario. Well… One way to find out!

Here’s what we learned. Server-side, the application is written in PHP. The IP address is resolved by the URI ‘secex.info’.

When we send, it calls ‘postMessage.php’:

When we receive, ‘downloadMessage.php’:

And it calls ‘newMessageCheck.php’ to, y’know, check for new messages.

Other analyses have forensically examined artefacts left behind; there are published descriptions of the encryption methods used for the local database connection. We didn’t go into more aggressive efforts such as disassembly because we are too lazy for that jazz!

My opinion, we didn’t learn anything wildly unexpected. Overall, Wickr seems an okay solution for convenient encrypted messaging. That’s always the trade: convenience vs. security. Least we ended with a Docker container for the software!

Github | Docker


Tags: , , ,
Permalink: 20170218.making.a.docker.wickr

Fri, 17 Feb 2017

The making of a Docker: Part I - Bitmessage GUI with SSH X forwarding

Lately, I’ve been doing a lot of work from a laptop running Kali. Engaged in pursuit of a new job, I’m brushing up on some old tools and skills, exploring some bits that have changed.

My primary desktop rig is currently running Arch because I love the fine grain control and the aggressive releases. Over the years, I’ve Gentoo’d and Slacked, Crunchbanged, BSD’d, Solarised, et cet. And I’ve a fondness for all of them, especially the security-minded focus of OpenBSD. But, these days we’re usually on Arch or Kali. Initially, I went with Black Arch on the laptop but I felt the things and ways I was fixing things were too specific to my situation to be good material for posts.

Anyway, I wanted to get Bitmessage running, corresponding to another post I have in drafts. On Kali, it wasn’t going well so I put it on the Arch box and just ran it over the network. A reasonable solution if you’re in my house but also the sort of solution that will keep a hacker up at night.

If you’re lucky, there’s someone maintaining a package for the piece of software that you want to run. However, that’s often not the case.

If I correctly recall, to “fix” the problem with Bitmessage on Kali would’ve required the manual installation an older version of libraries that were already present. Those libraries should, in fact, be all ebony and ivory, living together in harmony. However, I just didn’t love the idea of that solution. I wanted to find an approach that would be useful on a broader scale.

Enter containerization/virtualization!

Wanting the lightest solution, I quickly went to Docker and realized something. I have not before built a Docker container for a GUI application. And Bitmessage’s CLI/daemon mode doesn’t provide the fluid UX that I wanted. Well, the easy way to get a GUI out of a Docker container is to forward DISPLAY as an evironment variable (i.e., docker run -e DISPLAY=$DISPLAY). Splendid!

Except that it doesn’t work on current Kali which is using QT4. There’s a when graphical apps are run as root and though it is fixed in QT5, we are using current Kali. And that means we are, by default, uid 0 and QT4.

I saw a bunch of workarounds that seemed to have spotty (at best) rates of success including seting QT’s graphics system to Native and giving Xorg over to root. They, mostly, seemed to be cargo cult solutions.

What made the most sense to my (generally questionable) mind was to use X forwarding. Since I had already been running Bitmessage over X forwarding from my Arch box, I knew it should work just the same.

To be completely truthful, the first pass I took at this was with Vagrant mostly because it’s SO easy. Bring up your Vagrant Box and then:
vagrant ssh -- -X
Viola!

Having proof of concept, I wanted a Docker container. The reason for this is practical. Vagrant, while completely awesome, has substantially more overhead than Docker by virtualizing the kernel. We don’t want a separate kernel running for each application. Therefore Docker is the better choice for this project.

Also, we want this whole thing to be seemless. We want to run the command bitmessage and it should fire up with minimal awkwardness and hopefully no extra steps. That is we do not want to run the Docker container then SSH into it and execute Bitmessage as individual steps. Even though that’s going to be how we begin.

The Bitmessage wiki accurately describes how to install the software so we’ll focus on the SSH setup. Though when we build the Dockerfile we will need to add SSH to the list from the wiki.

We’re going to want the container to start so that the SSH daemon is ready. Until then we can’t SSH (with X forwarding) into the container. Then we’ll want to use SSH to kick off the Bitmessage application, drawing the graphical interface using our host system’s X11.

We’re going to take advantage of Docker’s -v --volume option which allows us to specify a directory on our host system to be mounted inside our container. Using this feature, we’ll generate our SSH keys on the host and make them automatically available inside the container. We’ll tuck the keys inside the directory that Bitmessage uses for storing its configuration and data. That way Bitmessage’s configuration and stored messages can be persistent between runs — and all of your pieces are kept in a single place.

When we generate the container /etc/ssh/sshd_config is configured to allow root login without password only (i.e., using keys). So here’s how we’ll get this done:
mkdir -p ~/.config/PyBitmessage/keys #Ensure that our data directories exist
cd ~/.config/PyBitmessage/keys
ssh-keygen -b 4096 -P "" -C $"$(whoami)@$(hostname)-$(date -I)" -f docker-bitmessage-keys #Generate our SSH keys
ln -fs docker-bitmessage-keys.pub authorized_keys #for container to see pubkey

Build our container (sources available at Github and Docker) and we’ll make the script to handle Bitmessage to our preferences. #!/bin/bash
# filename: bitmessage
set -euxo pipefail

# open Docker container:
# port 8444 available, sharing local directories for SSH and Bitmessage data
# detatched, interactive, pseudo-tty (-dit)
# record container ID in $DID (Docker ID)
DID=$(docker run -p 8444:8444 -v ~/.config/PyBitmessage/:/root/.config/PyBitmessage -v ~/.config/PyBitmessage/keys/:/root/.ssh/ -dit j0rg3/bitmessage-gui bash)

# find IP address of new container, record in $DIP (Docker IP)
DIP=$(docker inspect $DID | grep IPAddress | cut -d '"' -f 4)

# pause for one second to allow container's SSHD to come online
sleep 1

# SSH into container and execute Bitmessage
ssh -oStrictHostKeyChecking=no -oUserKnownHostsFile=/dev/null -oIdentityFile=~/.config/PyBitmessage/keys/docker-bitmessage-keys -X $DIP ./PyBitmessage/src/bitmessagemain.py

# close container if Bitmessage is closed
docker kill $DID

Okay, let’s make it executable: chmod +x bitmessage

Put a link to it where it can be picked up system-wide: ln -fs ~/docker-bitmessage/bitmessage /usr/local/bin/bitmessage

There we have it! We now have a functional Bitmessage inside a Docker container. \o/

In a future post we’ll look at using eCryptfs to further protect our Bitmessage data stores.

  Project files: Github and Docker


Tags: , , , , , , , , , , ,
Permalink: 20170217.making.a.docker.bitmessage

Sun, 13 Jul 2014

Simple Protection with iptables, ipset and Blacklists

Seems I’ve always just a few more things going on than I can comfortably handle. One of those is an innocent little server holding the beginnings of a new project.

If you expose a server to the Internet, very quickly your ports are getting scanned and tested. If you’ve an SSH server, there are going to be attempts to login as ‘root’ which is why it is ubiquitously advised that you disable root login. Also why many advise against allowing passwords at all.

We could talk for days about improvements; it’s usually not difficult to introduce some form of two-factor authentication (2FA) for sensitive points of entry such as SSH. You can install monitoring software like Logwatch which can summarize important points from your logs, such as: who has logged via SSH, how many times root was used, etc.

DenyHosts and Fail2ban are very great ways to secure things, according to your needs.

DenyHosts works primarily with SSH and asks very little from you in way of configuration, especially if you’re using a package manager to install a version that is configured for the distribution on which you’re working. If you’re installing from source you may need to find where are your SSH logs (e.g., /var/log/secure, /var/log/auth.log). It’s extremely easy to set up DenyHosts to synchronize so that you’re automatically blocking widely-known offenders whether or not they’re after your server.

In contrast, Fail2ban is going to take more work to get set up. However, it is extremely configurable and works with any log file you point it toward which means that it can watch anything (e.g., FTP, web traffic, mail traffic). You define your own jails which means you can ban problematic IP addresses according to preference. Ban bad HTTP attempts from HTTP only or stick their noses in the virtual corner and don’t accept any traffic from them until they’ve served their time-out by completely disallowing their traffic. You can even use Fail2ban to scan its own logs, so repeating offenders can be locked out for longer.

Today we’re going to assume that you’ve a new server that shouldn’t be seeing any traffic except from you and any others involved in the project. In that case, you probably want to block traffic pretty aggressively. If you’ve physical access to the server (or the ability to work with staff at the datacenter) then it’s better to err in the direction of accidentally blocking good guys than trying to be overly fault-tolerant.

The server we’re working on today is a Debian Wheezy system. It has become a common misconception that Ubuntu and Debian are, intents and purposes, interchangeable. They’re similar in many respects and Ubuntu is great preparation for using Debian but they are not the same. The differences, I think, won’t matter for this exercise but I am unsure because this was written using Wheezy.

Several minutes after bringing my new server online, I started seeing noise in the logs. I was still getting set up and really didn’t want to stop and take protective measures but there’s no point in securing a server after its been compromised. The default Fail2ban configuration was too forgiving for my use. It was scanning for 10 minutes and banning for 10 minutes. Since only a few people should be accessing this server, there’s no reason for anyone to be trying a different password every 15 minutes (for hours).

I found a ‘close-enough’ script and modified it. Here, we’ll deal with a simplified version.

First, lets create a name for these ne’er-do-wells in iptables:
iptables -N bad_traffic

For this one, we’ll use Perl. We’ll look at our Apache log files to find people sniffing ‘round and we’ll block their traffic. Specifically, we’re going to check Apache’s ‘error.log’ for the phrases ‘File does not exist’ and ‘client denied by server configuration’ and block people causing those errors. This would be excessive for servers intended to serve the general populace. For a personal project, it works just fine as a ‘DO NOT DISTURB’ sign.


#!/usr/bin/env perl
use strict;
use POSIX qw(strftime);

my $log = ($ARGV[0] ? $ARGV[0] : "/var/log/apache2/error.log");
my $chain = ($ARGV[1] ? $ARGV[1] : "bad_traffic");

my @bad = `grep -iE 'File does not exist|client denied by server configuration' $log |cut -f8 -d" " | sed 's/]//' | sort -u`;
my @ablk = `/sbin/iptables -S $chain|grep DROP|awk '{print $4}'|cut -d"/" -f1`;

foreach my $ip (@bad) {
if (!grep $_ eq $ip, @ablk) {
chomp $ip;
`/sbin/iptables -A $chain -s $ip -j DROP`;
print strftime("%b %d %T",localtime(time))." badht: blocked bad HTTP traffic from: $ip\n";
}
}

That gives us some great, utterly unforgiving, blockage. Looking at the IP addresses attempting to pry, I noticed that most of them were on at least one of the popular block-lists.

So let’s make use of some of those block-lists! I found a program intended to apply those lists locally but, of course, it didn’t work for me. Here’s a similar program; this one will use ipset for managing the block-list though only minor changes would be needed to use iptables as above:

#!/bin/bash
IP_TMP=ip.tmp
IP_BLACKLIST_TMP=ip-blacklist.tmp

IP_BLACKLIST=ip-blacklist.conf

WIZ_LISTS="chinese nigerian russian lacnic exploited-servers"

BLACKLISTS=(
"http://danger.rulez.sk/projects/bruteforceblocker/blist.php" # BruteForceBlocker IP List
"http://rules.emergingthreats.net/blockrules/compromised-ips.txt" # Emerging Threats - Compromised IPs
"http://www.spamhaus.org/drop/drop.txt" # Spamhaus Don't Route Or Peer List (DROP)
"http://www.spamhaus.org/drop/edrop.txt" # Spamhaus Don't Route Or Peer List (DROP) Extended
"http://cinsscore.com/list/ci-badguys.txt" # C.I. Army Malicious IP List
"http://www.openbl.org/lists/base.txt" # OpenBL.org 90 day List
"http://www.autoshun.org/files/shunlist.csv" # Autoshun Shun List
"http://lists.blocklist.de/lists/all.txt" # blocklist.de attackers
)

for address in "${BLACKLISTS[@]}"
do
echo -e "\nFetching $address\n"
curl "$address" >> $IP_TMP
done

for list in $WIZ_LISTS
do
wget "http://www.wizcrafts.net/$list-iptables-blocklist.html" -O - >> $IP_TMP
done

wget 'http://wget-mirrors.uceprotect.net/rbldnsd-all/dnsbl-3.uceprotect.net.gz' -O - | gunzip | tee -a $IP_TMP

grep -o '^[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}[/][0-9]\{1,3\}' $IP_TMP | tee -a $IP_BLACKLIST_TMP
grep -o '^[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}[^/]' $IP_TMP | tee -a $IP_BLACKLIST_TMP

sed -i 's/\t//g' $IP_BLACKLIST_TMP
sort -u $IP_BLACKLIST_TMP | tee $IP_BLACKLIST

rm $IP_TMP
rm $IP_BLACKLIST_TMP

wc -l $IP_BLACKLIST

if hash ipset 2>/dev/null
then
ipset flush bloxlist
while IFS= read -r ip
do
ipset add bloxlist $ip
done < $IP_BLACKLIST
else
echo -e '\nipset not found\n'
echo -e "\nYour bloxlist file is: $IP_BLACKLIST\n"
fi


Download here:
    bad_traffic.pl
    bloxlist.sh


Tags: , , , , , , , , , ,
Permalink: 20140713.simple.protection.with.iptables.ipset.and.blacklilsts

Tue, 18 Mar 2014

Random datums with Random.org

I was reading about the vulnerability in the ‘random’ number generator in iOS 7 (http://threatpost.com/weak-random-number-generator-threatens-ios-7-kernel-exploit-mitigations/104757) and thought I would share a method that I’ve used. Though, I certainly was not on any version of iOS but, at least, I can help in GNU/Linux and BSDs.

What if we want to get some random numbers or strings? We need a salt or something and, in the interest of best practices, we’re trying to restrain the trust given to any single participant in the chain. That is, we do not want to generate the random data from the server that we are on. Let’s make it somewhere else!

YEAH! I know, right? Where to get a random data can be a headache-inducing challenge. Alas! The noble people at Random.org are using atmospheric noise to provide randomness for us regular folk!

Let’s head over and ask for some randomness:
https://www.random.org/strings/?num=1&len=16&digits=on&loweralpha=on&unique=on&format=html&rnd=new

Great! Still feels a little plain. What if big brother saw the string coming over and knew what I was doing? I mean, aside from the fact that I could easily wrap the string with other data of my choosing.

Random.org is really generous with the random data, so why don’t we take advantage of that? Instead of asking for a single string, let’s ask for several. Nobunny will know which one I picked, except for me!

We’ll do that by increasing the 'num' part of the request that we’re sending:
https://www.random.org/strings/?num=25&len=16&digits=on&loweralpha=on&unique=on&format=html&rnd=new

They were also thinking of CLI geeks like us with the 'format' variable. We set that to 'plain' and all the fancy formatting for human eyes is dropped and we get a simple list that we don’t need to use any clever tricks to parse!
curl -s 'https://www.random.org/strings/?num=25&len=16&digits=on&loweralpha=on&unique=on&format=plain&rnd=new'

Now we’ve got 25 strings at the CLI. We can pick one to copy and paste. But what if we don’t want to do the picking? Well, we can use the local system to do that. We’ll have it pick a number between 1 and 25. It’s zero-indexed, so we’re going to increment by 1 so that our number is really between 1 and 25.
echo $(( (RANDOM % 25)+1 ))

Next, we’ll send our list to head with our random number. Head is going to give us the first X lines of what we send to it. So if our random number is 17, then it will give us the first 17 lines from Random.org
curl -s 'https://www.random.org/strings/?num=25&len=16&digits=on&loweralpha=on&unique=on&format=plain&rnd=new' | head -$(( (RANDOM % 25)+1 ))

After that, we’ll use the friend of head: tail. We’ll tell tail that we want only the last record of the list, of psuedo-random length, of strings that are random.
curl -s 'https://www.random.org/strings/?num=25&len=16&digits=on&loweralpha=on&unique=on&format=plain&rnd=new' | head -$(( (RANDOM % 25)+1 )) | tail -1

And we can walk away feeling pretty good about having gotten some properly random data for our needs!


Tags: ,
Permalink: 20140318.random.data

Mon, 17 Feb 2014

Installing INN’s Project Largo in a Docker containter

Prereqruisites: Docker, Git, SSHFS.

Today we’re going to look at using Docker to create a WordPress installation with the Project Largo parent theme and a child theme stub for us to play with.

Hart Hoover has established an image for getting a WordPress installation up and running using Docker. For whatever reason, it didn’t work for me out-of-box but we’re going to use his work to get started.

Let’s make a place to work and move into that directory:
cd ~
mkdir project.largo.wordpress.docker
cd project.largo.wordpress.docker

We’ll clone the Docker/Wordpress project. For me, it couldn’t untar the latest WordPress. So we’ll download it outside the container, untar it and modify the Dockerfile to simply pull in a copy:
git clone https://github.com/hhoover/docker-wordpress.git
cd docker-wordpress/
ME=$(whoami)
wget http://wordpress.org/latest.tar.gz
tar xvf latest.tar.gz
sed -i 's/ADD http:\/\/wordpress.org\/latest.tar.gz \/wordpress.tar.gz/ADD \.\/wordpress \/wordpress/' Dockerfile
sed -i '/RUN tar xvzf \/wordpress\.tar\.gz/d' Dockerfile

Then, build the project which may take some time.
sudo docker build -t $ME/wordpress .

If you’ve not the images ready for Docker, the process should begin with something like:
Step 0 : FROM boxcar/raring
Pulling repository boxcar/raring
32737f8072d0: Downloading [> ] 2.228 MB/149.7 MB 12m29s

And end something like:
Step 20 : CMD ["/bin/bash", "/start.sh"]
---> Running in db53e215e2fc
---> 3f3f6489c700
Successfully built 3f3f6489c700

Once the project is built, we will start it and forward ports from the container to the host system, so that the Docker container’s site can be accessed through port 8000 of the host system. So, if you want to see it from the computer that you’ve installed it on, you could go to ‘HTTP://127.0.0.1:8000’. Alternatively, if your host system is already running a webserver, we could use SSHFS to mount the container’s files within the web-space of the host system.

In this example, however, we’ll just forward the ports and mount the project locally (using SSHFS) so we can easily edit the files perhaps using a graphical IDE such as NetBeans or Eclipse.

Okay, time to start our Docker image and find its IP address (so we can mount its files):
DID=$(docker run -p 8000:80 -d $ME/wordpress)
DIP=$(docker inspect $DID | grep IPAddress | cut -d '"' -f 4)
docker logs $DID| grep 'ssh user password:' --color

Copy the SSH password and we will make a local directory to access the WordPress installation of our containter.
cd ~
mkdir largo.mount.from.docker.container
sshfs user@$DIP:/var/www $HOME/largo.mount.from.docker.container
cd largo.mount.from.docker.container
PROJECT=$(pwd -P)

Now, we can visit the WordPress installation and finish setting up. From the host machine, it should be ‘HTTP://127.0.0.1:8000’. There you can configure Title, Username, Password, et cet. and finish installing WordPress.

Now, let’s get us some Largo! Since this is a test project, we’ll sacrifice security to make things easy. Our Docker WordPress site isn’t ready for us to easily install the Largo parent theme, so we’ll make the web directory writable by everybody. Generally, this is not a practice I would condone. It’s okay while we’re experimenting but permissions are very important on live systems!

Lastly, we’ll download and install Largo and the Largo child theme stub.
ssh user@$DIP 'sudo chmod -R 777 /var/www'
wget https://github.com/INN/Largo/archive/master.zip -O $PROJECT/wp-content/themes/largo.zip
unzip $PROJECT/wp-content/themes/largo.zip -d $PROJECT/wp-content/themes/
mv $PROJECT/wp-content/themes/Largo-master $PROJECT/wp-content/themes/largo
wget http://largoproject.wpengine.netdna-cdn.com/wp-content/uploads/2012/08/largo-child.zip -O $PROJECT/wp-content/themes/largo-child.zip
unzip $PROJECT/wp-content/themes/largo-child.zip -d $PROJECT/wp-content/themes
rm -rf $PROJECT/wp-content/themes/__MACOSX/

We are now ready to customize our Project Largo child theme!


Tags: , , , , , ,
Permalink: 20140217.project.largo.docker

Sun, 09 Jun 2013

ixquick link maker

In an effort to promote practical privacy measures, when I send people links to search engines, I choose ixquick. However, my personal settings submit my search terms via POST data rather than GET, meaning that the search terms aren’t in the URL.

Recently, I’ve found myself hand-crafting links for people and then I paste the link into a new tab, to make sure I didn’t fat-finger anything. Not a problem per se, but the technique leaves room for a bit more efficiency. So I’ve taken the ‘A Search Box on Your Website’ tool offered by ixquick and slightly modified the code it offers, to use GET variables, in a new tab where I can then copy the URL and provide the link to others.

You can test, or use, it here — I may add it (or a variant that just provides you the link) to the navigation bar above. First, though, I’m going to mention the need to the outstanding minds at ixquick because it would make a LOT more sense on their page than on mine.


Tags: ,
Permalink: 20130609.ixquick.search