c0d3 :: j0rg3

A collection of tips, tricks and snips. A proud Blosxom weblog. All code. No cruft.

Thu, 13 Jul 2017

Improved Anonymity on Kali Linux

I’m not entirely certain when BackTrack/Kali began behaving more like a regular desktop distro but I seem to recall that originally, networking subsystems were down when you booted up into Run Level 3. It was up to you to turn on the interfaces and fire up a GUI if such was desired. IMO, that’s precisely how it should be. I get it. Most of us aren’t ever won’t ever find ourselves in a clandestine lot, inside of a snack and caffeine filled, non-descript, conversion van with a Yagi pointed at the bubble-window, ready to pilfer innocent datums just trying to get by in this lossy-protocoled, collision-rife, world.

Rather, very many of us just want the stinking box online so we can run through our tutorials and hack our own intentionally vulnerable VMs. A thorough taste of hacking’s un-glamorous underbelly is quite enough for many.

I’m confident that the BT fora were inundated with fledgling hackers complaining that their fresh install couldn’t find WiFi or didn’t load the desktop. However, I feel that distros dedicated to the Red Team should try to instill good habits. Having your machine boot and activate an interface announcing your presence and spewing out MAC and hostname is bad for business. Booting into a (comparatively) heavy GUI is also not where I want to begin.

Let’s imagine that we’re trying to crack into a thing. Don’t we want to apply maximal CPU resources, rather than having GUI elements bringing little beyond cost? If you notice, very many of the related tools still live on the CLI. The typical course of development (e.g.: Nmap, Metasploit) is that the CLI version is thoroughly developed before someone drops a GUI atop (respectively: Zenmap, Armitage).

So let’s take our Kali and make a few quick changes. We want to boot up in text/CLI mode and we want networking left off until we choose to make noise. Further, we want to randomize our MAC address and hostname at every boot.

We’ll use iwconfig to enumerate our wireless interfaces.
lo        no wireless extensions.

wlan1     IEEE 802.11 ESSID:"ESSID"
          Mode:Managed Frequency:2.412 GHz Access Point: 17:23:53:96:BE:67
          Bit Rate=72.2 Mb/s Tx-Power=20 dBm
          Retry short limit:7 RTS thr:off Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=70/70 Signal level=-21 dBm
          Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
          Tx excessive retries:253 Invalid misc:400 Missed beacon:0

eth0      no wireless extensions.

wlan0     IEEE 802.11 ESSID:off/any
          Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
          Retry short limit:7 RTS thr:off Fragment thr:off
          Encryption key:off
          Power Management:on

We have two wireless interfaces: wlan0, wlan1

Okay, first let’s configure to start up in text mode:
> systemctl set-default multi-user.target
Created symlink /etc/systemd/system/default.target → /lib/systemd/system/multi-user.target.

Traditionally from text mode, we bring up the GUI desktop with the command startx. Since we don’t yet have that command, let’s create it:
> echo "systemctl start gdm3.service" > /usr/sbin/startx && chmod +x /usr/sbin/startx

Disable network-manager autostart:
> systemctl disable network-manager.service
> sed -i 's/5min/30sec/' /etc/systemd/system/network-online.target.wants/networking.service

Now, let’s randomize our hostname and MAC addresses at every boot by adding some cronjobs:
> crontab -e

We’ll add two jobs to randomize MAC address and one for our host name:
@reboot macchanger -r wlan0
@reboot macchanger -r wlan1
@reboot hostname `strings /dev/urandom | grep -o '[[:alnum:]]' | head -n 30 | tr -d '\n'`

We ‘re good! We’ve improved efficiency by staving off the GUI for when we genuinely want it and improved anonymity by randomizing some common ways of identifying the rig.

Tags: , , , , , , , ,
Permalink: 2017-07-10.improved.anonymity.on.kali.linux

Sun, 19 Feb 2017

Privacy: perspective and primer.

Hello friends.

While the overall telos of this blog is to, generally speaking, convey code snippets and inspire the personal projects of others, today we’re going to do something a smidgeon different.

This will be a layman’s look at varied dimensions of information security from a comfortable distance. Over the years, I’ve secured servers, operating systems, medical data, networks, communications and I’ve unsecured many of these same things. The topics are too sprawling to be covered in a quick summary — but let’s find a point of entry.

Those of us who are passionate about information security are well aware of how daunting is the situation. For newcomers, it sometimes seems rather impossible. Pick any subject and there are probably well-informed and convincing experts in diametric equidistance from any “happy medium”.

Let’s imagine that (like most of us) you don’t have anything spectacular to protect. However, you dislike the idea of our ever-dissolving privacy. Therefore you want to encrypt communications. Maybe you begin to use Signal. However, there are criticisms that there is a “backdoor” (there is not). Further, there are accusations that open source projects are coded by those who can’t get real jobs. Conversely, open source projects are widely open for peer review. If it worries one enough they are free to review code themselves.

PGP can encrypt content but concerns surround algorithmic selections. Some are worried about metadata crumbs. Of course, there’s nothing preventing the frequent switching of keys and email addresses. You could use BitMessage, any number of chat solutions or drop at paste bins.

Let’s leave those concerns aside for when you’ve figured out what you’re intending to protect. These arguments surround any subject in information security and we’re not going to investigate them on a case by case basis. Least, not in this post.

At the coarsest granularity, the question is analogous to the practicality of locking your doors or sealing your post envelopes. Should I take measures toward privacy?

My opinion is rather predictable: of course you should!

There’s a very pragmatic explanation. If there ever comes a day when you should like to communicate privately, that’s a terrible time to start learning.

Take the easy road and start using some of the myriad tools and services available.

Should you decide to take InfoSec seriously, you’ll need to define a threat model.
That is: What am I protecting? From whom am I protecting? (e.g. what are probable attack vectors?)

That’s where you need to make choices about trusting products, protocols, methods, algorithms, companies, servers, et cet. Those are all exciting subjects to explore but all too often brushing up against them can be exasperating and cause premature burn-out.

That in mind, let’s employ the philosophy that any effort toward security is better than none and take a look at a few points where one might get wetted-toes.

If you have questions or want specific advice, there are several ways below to initiate a secure conversation with me.


Secure your browser:

  • Privacy Badger: Block tracking
  • HTTPS Everywhere: Increase your encryptioning
  • uBlock: Advertisements are for others

    Secure communications:

  • Mailvelope: PGP email encryption for your major webmail provider (e.g., Gmail) | contact | pubkey
  • Tutanota: Encrypted webmail | Kontakt
  • Protonmail: Well-established provider of PGP encrypted webmail, featuring 2FA | kontakta
  • BitMessage: P2P encrypted communications protocol | contact: BM-2D9tDkYEJSTnEkGDKf7xYA5rUj2ihETxVR | Bitmessage channel list
  •   [ Bitmessage in a Docker container ]

  • BitMessage.ch: BitMessage email gateway | contact
  • BitMsg.me: Online BitMessage service
  • Keybase.io: Keybase maps your identity to your public keys, and vice versa
  • Signal: PGP encrypted TXT messages
  • Wire: Encrypted chat, video and calls
  • RIOT: Open-source, IRC-based, Matrix; run your own server
  • Wickr: Encrypted ephemeral chat
  •   [ n.b. Wickr’s .deb package seeks a unicode library (libicu52) which is not available to a recent Kali (or anything) install; .deb file is based on Ubuntu’s 2014 LTS release. Wickr in a Docker container ]


    Explore alternate nets (e.g., Deep Web, Dark Net):

  • MaidSafe: Promising new alt-web project
  • Qubes: a reasonably secure operating system
  • FreeNet: Alt-net based primarily on already knowing with whom you intend to collaborate
  • Bitmask: VPN solution to anonymize your traffic
  • TAILS: A live operating system based on the Tor network
  • TorBrowser: Stand-alone browser for Tor (less secure than TAILS)
  • Whonix: the most secure (and complex) way to access the Tor network
  • i2p: an other approach to creating a secure and private alternate web
  • Morph.is: fun alt-net, aimed at producing The World Brain. Although, it’s future looks a lot less promising since the lead dev was killed.
  • ZeroNet: one more encrypted anonymous net
  • Have fun and compute safely!

    Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
    Permalink: 20170219.privacy.prespective.primer

    Mon, 02 Jan 2017

    Securing a new server

    Happy new year! New year means new servers, right?

    That provides its own set of interesting circumstances!

    The server we’re investigating in this scenario was chosen for being a dedicated box in a country that has quite tight privacy laws. And it was a great deal offered on LEB.

    So herein is the fascinating bit. The rig took a few days for the provider to set up and, upon completion, the password for SSHing into the root account was emailed out. (o_0)

    In very security-minded considerations, that means that there was a window of opportunity for bad guys to work on guessing the password before its owner even tuned in. That window remains open until the server is better secured. Luckily, there was a nice interface for reinstalling the OS permitting its purchaser to select a password.

    My preferred approach was to script the basic lock-down so that we can reinstall the base OS and immediately start closing gaps.

    In order:

  • Set up SSH keys (scripted)
  • Disable password usage for root (scripted)
  • Install and configure IPset (scripted. details in next post)
  • Install and configure fail2ban
  • Install and configure PortSentry

  • In this post, we’re focused on the first two steps.

    The tasks to be handled are:

  • Generate keys
  • Configure local SSH to use key
  • Transmit key to target server
  • Disable usage of password for ‘root’ account

  • We’ll use ssh-keygen to generate a key — and stick with RSA for ease. If you’d prefer ECC then you’re probably reading the wrong blog but feel encouraged to contact me privately.

    The code:

    #configure variables
    remote_pass="thisisaratheraquitecomplicatedpasswordbatterystaple" # https://xkcd.com/936/
    local_date=`date -I`

    #generate key without passphrase
    ssh-keygen -b 4096 -P "" -C $local_user@local_host-$local_date -f $local_filename

    #add reference to generated key to local configuration
    printf '%s\n' "Host $remote_host" "IdentityFile $local_filename" >> ~/.ssh/config

    #copy key to remote host
    sshpass -p $remote_pass ssh-copy-id $remote_user@$remote_host

    #disable password for root on remote
    ssh $remote_user@$remote_host "cp /etc/ssh/sshd_config /etc/ssh/sshd_config.bak && sed -i '0,/RE/s/PermitRootLogin yes/PermitRootLogin no/' /etc/ssh/sshd_config"

    We just run this script soon as the OS is reinstalled and we’re substantially safer. As a Deb8 install, quickly pulling down fail2ban and PortSentry makes things quite a lot tighter.

    In another post, we’ll visit the 2017 version of making a DIY script to batten the hatches using a variety of publicly provided blocklists.

    Download here:

    Tags: , , , ,
    Permalink: 20170102.securing.a.new.server

    Thu, 30 May 2013

    Making ixquick your default search engine

    In this writer’s opinion, it is vitally important that we take reasonable measures now to help insure anonymity, lest we create a situation where privacy no longer exists, and the simple want of, becomes suspicious.

    Here’s how to configure your browser to automatically use a search engine that respects your privacy.


    1. Click Settings.
    2. Click “Set pages” in the “On startup” section.
    3. Enter https://ixquick.com/eng/ in the “Add a new page” text field.
    4. Click OK.
    5. Click “Manage search engines…”
    6. At the bottom of the “Search Engines” dialog, click in the “Add a new search engine” field.
    7. Enter
    8. Click “Make Default”.
    9. Click “Done”.


    1. Click the Tools Menu.
    2. Click Options.
    3. Click the General tab.
    4. In “When Firefox Starts” dropdown, select “Show my home page”.
    5. Enter https://ixquick.com/eng/ in the “Home Page” text field.
    6. Click one of the English options here.
    7. Check box for “Start using it right away.”
    8. Click “Add”.


    1. Click “Manage Search Engines
    2. Click “Add”
    3. Enter
      Name: ixquick
      Keyword: x
      Address: https://ixquick.com/do/search?lui=english&language=english&cat=web&query=%s
    4. Check “Use as default search engine”
    5. Click “OK”

    Internet Explorer:

        _     ___  _ __        ___   _ _____ ___ 
       | |   / _ \| |\ \      / / | | |_   _|__ \
       | |  | | | | | \ \ /\ / /| | | | | |   / /
       | |__| |_| | |__\ V  V / | |_| | | |  |_| 
       |_____\___/|_____\_/\_/   \___/  |_|  (_) 
      (This is not a good strategy for privacy.)



    You are now one step closer to not having every motion on the Internet recorded.

    This is a relatively small measure, though. You can improve your resistance to prying eyes (e.g., browser fingerprinting) by using the Torbrowser Bundle, or even better, Tails, and routing your web usage through Tor, i2p, or FreeNet.

    If you would like more on subjects like anonymyzing, privacy and security then drop me a line via email or Bitmessage me: BM-2D9tDkYEJSTnEkGDKf7xYA5rUj2ihETxVR

    Tags: , , , , , , , , , , , , , ,
    Permalink: 20130530.hey.you.get.offa.my.data

    Mon, 20 May 2013

    Debugging PHP with Xdebug

    I have finished (more-or-less) making a demo for the Xdebug togglin’ add-on/extension that I’ve developed.

    One hundred percent of the feedback about this project has been from Chrome users. Therefore, the Chrome extension has advanced with the new features (v2.0), allowing selective en/dis-ableing portions of Xdebug’s output. That is you can set Xdebug to firehose mode (spitting out everything) and then squelch anything not immediately needed at the browser layer. The other information remains present, hidden in the background, available if you decide that you need to have a look.

    The Firefox version is still at v1.2 but will be brought up to speed as time permits.

    If you want that firehose mode for Xdebug, here’s a sample of some settings for your configuration ‘.ini’ file.

    The demo is here.

    Tags: , , , , , , ,
    Permalink: 20130520.debugging.php.with.xdebug