c0d3 :: j0rg3

A collection of tips, tricks and snips. A proud Blosxom weblog. All code. No cruft.

Sat, 04 Mar 2017

Official(ish) deep dark onion code::j0rg3 mirror

Recently I decided that I wanted my blog to be available inside of the Deep, Dark Onion (Tor).

First time around, I set up a proxy that I modified to access only the clear web version of the blog and to avail that inside Tor as a ‘hidden service’.

My blog is hosted on equipment provided by the kind folk at insomnia247.nl and I found that, within a week or so, the address of my proxy was blocked. It’s safe for us to assume that it was simply because of the outrageous popularity it received inside Tor.

By “safe for us to assume” I mean that it is highly probable that no significant harm would come from making that assumption. It would not be a correct assumption, though.

What’s more true is that within Tor things are pretty durn anonymous. Your logs will show Tor traffic coming from 127.0.0.1 only. This is a great situation for parties that would like to scan sites repeatedly looking for vulnerabilities — because you can’t block them. They can scan your site over and over and over. And the more features you have (e.g., comments, searches, any form of user input), the more attack vectors are plausible.

So why not scan endlessly? They do. Every minute of every hour.

Since insomnia247 is a provider of free shells, it is incredibly reasonable that they don’t want to take the hit for that volume of traffic. They’re providing this service to untold numbers of other users, blogs and projects.

For that reason, I decided to set up a dedicated mirror.

Works like this: my blog lives here. I have a machine at home which uses rsync to make a local copy of this blog. Immediately thereafter it rsyncs any newly gotten data up to the mirror in onionland.

After consideration, I realized that this was also a better choice just in case there is something exploitable in my blog. Instead of even risking the possibility that an attacker could get access to insomnia247, they can only get to my completely disposable VPS which has hardly anything on it except this blog and a few scripts to which I’ve already opened the source code.

I’ve not finished combing through but I’ve taken efforts to ensure it doesn’t link back to clear web. To be clear, there’s nothing inherently wrong with that. Tor users will only appear as the IP address of their exit node and should still remain anonymous. To me, it’s just onion etiquette. You let the end-user decide when they want to step outside.

To that end, the Tor mirror does not have the buttons to share to Facebook, Twitter, LinkedIn, Google Plus.

That being said, if you’re a lurker of those Internet back-alleys then you can find the mirror at: http://aacnshdurq6ihmcs.onion

Happy hacking, friends!


Tags: , , , , , , , , , , ,
Permalink: 20170304.deep.dark.onion

Sat, 25 Jan 2014

Network-aware Synergy client

My primary machines are *nix or BSD variants, though I certainly have some Windows-based rigs also. Today we’re going to share some love with Windows 7 and PowerShell.

One of my favorite utilities is Synergy. If you’re not already familiar it allows to you seamlessly move from the desktop of one computer to another with the same keyboard and mouse. It even supports the clipboard so you might copy text from a GNU/Linux box and paste it in a Windows’ window. Possibly, they have finished adding drag and drop to the newer versions. I am not sure because I run a relatively old version that is supported by all of the machines that I use regularly.

What’s the problem, then? The problem was that I was starting my Synergy client by hand. Even more disturbing, I was manually typing the IP address at work and at home, twice or more per weekday. This behavior became automated by my brain and continued for months unnoticed. But this is no kind of life for a geek such as myself, what with all this superfluous clicking and tapping!

Today, we set things right!

In my situation, the networks that I use happen to assign IP addresses from different subnets. If you’ve not the convenience of that situation then you might need to add something to the script. Parsing an ipconfig/ifconfig command, you could possibly use something like the Default Gateway or the Connection-specific DNS Suffix. Alternatively, you could check for the presence of some network share, a file on server or anything that would allow you to uniquely identify the surroundings.

As I imagined it, I wanted the script to accomplish the following things

  • see if Synergy is running (possibly from the last location), if so ask if we need to kill it and restart so we can identify a new server
  • attempt to locate where we are and connect to the correct Synergy server
  • if the location is not identified, ask whether to start the Synergy client

This is how I accomplished that task:

# [void] simply supresses the noise made loading 'System.Reflection.Assembly'
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")

# Define Synergy server IP addresses
$synergyServerWork = "192.168.111.11"
$synergyServerHome = "192.168.222.22"

# Define partial IP addresses that will indicate which server to use
$synergyWorkSubnets = "192.168.111", "192.168.115"
$synergyHomeSubnets = "192.168.222", "192.168.225"

# Path to Synergy Client (synergyc)
$synergyClientProgram = "C:\Program Files\Synergy\synergyc.exe"

# Path to Syngery launcher, for when we cannot identify the network
$synergyLauncherProgram = "C:\Program Files\Synergy\launcher.exe"

# Remove path and file extension to give us the process name
$processName = $synergyClientProgram.Substring( ($synergyClientProgram.lastindexof("\") + 1), ($synergyClientProgram.length - ($synergyClientProgram.lastindexof("\") + 5) ))

# Grab current IP address
$currentIPaddress = ((ipconfig | findstr [0-9].\.)[0]).Split()[-1]

# Find the subnet of current IP address
$location = $currentIPaddress.Substring(0,$currentIPaddress.lastindexof("."))


function BalloonTip ($message)
{
# Pop-up message from System Tray
$objNotifyIcon = New-Object System.Windows.Forms.NotifyIcon
$objNotifyIcon.Icon = [System.Drawing.Icon]::ExtractAssociatedIcon($synergyClientProgram)
$objNotifyIcon.BalloonTipText = $message
$objNotifyIcon.Visible = $True
$objNotifyIcon.ShowBalloonTip(15000)
}


#main

# If Synergy client is already running, do we need to restart it?
$running = Get-Process $processName -ErrorAction SilentlyContinue
if ($running) {
$answer = [System.Windows.Forms.MessageBox]::Show("Synergy is running.`nClose and start again?", "OHNOES", 4)
if ($answer -eq "YES") {
Stop-Process -name $processName
}
Else {
exit
}
}

# Do we recognize the current network?
if ($synergyWorkSubnets -contains $location) {
BalloonTip "IP: $($currentIPaddress)`nServer: $($synergyServerWork)`nConnecting to Synergy server at work."
& $synergyClientProgram $synergyServerWork
exit
}
ElseIf ($synergyHomeSubnets -contains $location) {
BalloonTip "IP: $($currentIPaddress)`nServer: $($synergyServerHome)`nConnecting to Synergy server at home."
& $synergyClientProgram $synergyServerHome
exit
}
Else {
$answer = [System.Windows.Forms.MessageBox]::Show("Network not recognized by IP address: {0}`n`nLaunch Synergy?" -f $unrecognized, "OHNOES", 4)
if ($answer -eq "YES") {
& $synergyLauncherProgram
}
}

Then I saved the script in "C:\Program Files\SynergyStart\", created a shortcut and used the Change Icon button to make the same as Synergy’s and made the Target:
C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -WindowStyle Hidden & 'C:\Program Files\SynergyStart\synergy.ps1'

Lastly, I copied the shortcut into the directory of things that run when the system starts up:
%APPDATA%\Microsoft\Windows\Start Menu\Programs\Startup

Now, Synergy connects to the needed server at home and work. If it can’t figure out where it is, it asks if it should run it at all.

As they say, a millisecond saved is a millisecond earned.

This post was very nearly published without a Linux equivalent. Nearly.

Same trick for bash/zsh: #!/bin/zsh

# Define Synergy server IP addresses
synergyServerWork="192.168.111.11"
synergyServerHome="192.168.222.22"

# Define partial IP addresses that will indicate which server to use
synergyWorkSubnets=("192.168.111" "192.168.115")
synergyHomeSubnets=("192.168.222" "192.168.225")

# Path to Synergy Client (synergyc)
synergyClientProgram="/usr/bin/synergyc"

# Path to QuickSyngery, for when we cannot identify the network
synergyLauncherProgram="/usr/bin/quicksynergy"

# Remove path and file extension to give us the process name
processName=`basename $synergyClientProgram`

# Grab current IP address, assumes '192' is in use. (e.g., 192.168.1.1)
currentIPaddress=`ip addr show | grep 192 | awk "{print $2}" | sed 's/inet //;s/\/.*//;s/ //g'`

# Find the subnet of current IP address
location=`echo $currentIPaddress | cut -d '.' -f 1,2,3`

for i in "${synergyWorkSubnets[@]}"
do
if [ "${i}" = "${location}" ]
then
break
fi
done

#main

# If Synergy client is already running, do we need to restart it?
running=`ps ax | grep -v grep | grep $processName`
if [ $running ]
then
if `zenity --question --ok-label="Yes" --cancel-label="No" --text="Synergy is running.\nClose and start again?"`
then
pkill $processName
else
exit
fi
fi

# Do we recognize the current network?
for i in "${synergyWorkSubnets[@]}"
do
if [ "${i}" = "${location}" ]
then
notify-send "IP:$currentIPaddress Server:$synergyServerWork [WORK]"
$synergyClientProgram $synergyServerWork
exit
fi
done

for i in "${synergyHomeSubnets[@]}"
do
if [ "${i}" = "${location}" ]
then
notify-send "IP:$currentIPaddress Server:$synergyServerWork [HOME]"
$synergyClientProgram $synergyServerHome
exit
fi
done

if `zenity --question --ok-label="Yes" --cancel-label="No" --text="Network not recognized by IP address: $currentIPaddress\nLaunch Synergy?"`
then
$synergyLauncherProgram
fi

To get it to run automatically, you might choose to call the script from /etc/init.d/rc.local.

Download here:
  PowerShell:
    synergy.ps1
  GNU/Linux:
    synergy.sh


Tags: , ,
Permalink: 20140125.network_aware_synergy_client

Thu, 13 Jun 2013

Blogitechture continued… Simplify with Vim

Last we were discussing the structure and design of your own CLI-centric blog platform, we had some crude methods of starting and resuming posts before publishing.

Today, let’s explore a little more into setting up a bloging-friendly environment because we need to either make the experience of blogging easy or we’ll grow tired of the hassle and lose interest.

We can reasonably anticipate that we won’t want to beleaguered with repetitious typing of HTML bits. If we’re going to apply paragraph tags, hyperlinks, codeblocks, etc. with any frequency, that task is best to be simplified. Using Vim as our preferred editor, we will use Tim Pope’s brilliant plug-ins ‘surround’ and ‘repeat’, combined with abbreviations to take away the tedium.

The plug-ins just need dropped into your Vim plugin directory (~/.vim/plugin/). The directory may not exist if you don’t have any plug-ins yet. That’s no problem, though. Let’s grab the plugins:

cd ~/.vim/
wget "http://www.vim.org/scripts/download_script.php?src_id=19287" -O surround.zip
wget "http://www.vim.org/scripts/download_script.php?src_id=19285" -O repeat.zip

Expand the archives into the appropriate directories:

unzip surround.zip
unzip repeat.zip

Ta-da! Your Vim is now configured to quickly wrap (surround) in any variety of markup. When working on a blog, you might use <p> tags a lot by putting your cursor amid the paragraph and typing yss<p>. The plug-in will wrap it with opening and closing paragraph tags. Move to your next paragraph and then press . to repeat.

That out of the way, let’s take advantage of Vim’s abbreviations for some customization. In our .vimrc file, we can define a few characters that Vim will expand according to their definition. For example, you might use:
ab <gclb> <code class="prettyprint lang-bsh linenums:1">
Then, any time you type <gclb> and bress <enter>, you’ll get:
<code class="prettyprint lang-bsh linenums:1">

The next time that we take a look at blogitecture, we will focus on making the posts convenient to manage from our CLI.


Tags: , , , ,
Permalink: 20130613.blogitechture.continued

Thu, 30 May 2013

Making ixquick your default search engine

In this writer’s opinion, it is vitally important that we take reasonable measures now to help insure anonymity, lest we create a situation where privacy no longer exists, and the simple want of, becomes suspicious.

Here’s how to configure your browser to automatically use a search engine that respects your privacy.

Chrome:

  1. Click Settings.
  2. Click “Set pages” in the “On startup” section.
  3. Enter https://ixquick.com/eng/ in the “Add a new page” text field.
  4. Click OK.
  5. Click “Manage search engines…”
  6. At the bottom of the “Search Engines” dialog, click in the “Add a new search engine” field.
  7. Enter
    ixquick
    ixquick.com
    https://ixquick.com/do/search?lui=english&language=english&cat=web&query=%s
  8. Click “Make Default”.
  9. Click “Done”.

Firefox:

  1. Click the Tools Menu.
  2. Click Options.
  3. Click the General tab.
  4. In “When Firefox Starts” dropdown, select “Show my home page”.
  5. Enter https://ixquick.com/eng/ in the “Home Page” text field.
  6. Click one of the English options here.
  7. Check box for “Start using it right away.”
  8. Click “Add”.

Opera:

  1. Click “Manage Search Engines
  2. Click “Add”
  3. Enter
    Name: ixquick
    Keyword: x
    Address: https://ixquick.com/do/search?lui=english&language=english&cat=web&query=%s
  4. Check “Use as default search engine”
  5. Click “OK”

Internet Explorer:

      _     ___  _ __        ___   _ _____ ___ 
     | |   / _ \| |\ \      / / | | |_   _|__ \
     | |  | | | | | \ \ /\ / /| | | | | |   / /
     | |__| |_| | |__\ V  V / | |_| | | |  |_| 
     |_____\___/|_____\_/\_/   \___/  |_|  (_) 
    
    
    (This is not a good strategy for privacy.)

Congratulations!

\o/

You are now one step closer to not having every motion on the Internet recorded.

This is a relatively small measure, though. You can improve your resistance to prying eyes (e.g., browser fingerprinting) by using the Torbrowser Bundle, or even better, Tails, and routing your web usage through Tor, i2p, or FreeNet.

If you would like more on subjects like anonymyzing, privacy and security then drop me a line via email or Bitmessage me: BM-2D9tDkYEJSTnEkGDKf7xYA5rUj2ihETxVR


Tags: , , , , , , , , , , , , , ,
Permalink: 20130530.hey.you.get.offa.my.data

Mon, 20 May 2013

Debugging PHP with Xdebug

I have finished (more-or-less) making a demo for the Xdebug togglin’ add-on/extension that I’ve developed.

One hundred percent of the feedback about this project has been from Chrome users. Therefore, the Chrome extension has advanced with the new features (v2.0), allowing selective en/dis-ableing portions of Xdebug’s output. That is you can set Xdebug to firehose mode (spitting out everything) and then squelch anything not immediately needed at the browser layer. The other information remains present, hidden in the background, available if you decide that you need to have a look.

The Firefox version is still at v1.2 but will be brought up to speed as time permits.

If you want that firehose mode for Xdebug, here’s a sample of some settings for your configuration ‘.ini’ file.

The demo is here.


Tags: , , , , , , ,
Permalink: 20130520.debugging.php.with.xdebug